[PATCH] dt-bindings: display: bridge: Drop requirement on input port for DSI devices

[Maxime Ripard]

On Thu, Mar 24, 2022 at 03:43:42PM +0200, Laurent Pinchart wrote:
> On Thu, Mar 24, 2022 at 09:18:19AM +0100, Maxime Ripard wrote:
> > On Wed, Mar 23, 2022 at 10:38:19PM +0200, Laurent Pinchart wrote:
> > > Hi Maxime,
> > > 
> > > (CC'ing Sakari)
> > > 
> > > Thank you for the patch.
> > > 
> > > On Wed, Mar 23, 2022 at 04:48:23PM +0100, Maxime Ripard wrote:
> > > > MIPI-DSI devices, if they are controlled through the bus itself, have to
> > > > be described as a child node of the controller they are attached to.
> > > > 
> > > > Thus, there's no requirement on the controller having an OF-Graph output
> > > > port to model the data stream: it's assumed that it would go from the
> > > > parent to the child.
> > > > 
> > > > However, some bridges controlled through the DSI bus still require an
> > > > input OF-Graph port, thus requiring a controller with an OF-Graph output
> > > > port. This prevents those bridges from being used with the controllers
> > > > that do not have one without any particular reason to.
> > > > 
> > > > Let's drop that requirement.
> > > 
> > > I'm sure this won't come as a surprise, I'm very much opposed to this
> > > change, for two reasons.
> > > 
> > > First, ports are part of the hardware, even if they're not connected. It
> > > thus simplifies handling in drivers if they're always present.
> > > 
> > > Then, and that's the most important reason, I think it's a mistake not
> > > to model the DSI data connection using OF graph unconditionally, even
> > > when the DSI sink device is also controlled through the DSI bus (using
> > > DCS) and is in that case a child of the DSI source device in the DT
> > > hierarchy.
> > 
> > That's the way we do for any other device though. You never addressed
> > that comment, but it's very much the same that occurs for i2c or spi
> > controllers and their device. They all get their data from the parent
> > bus. I don't see you advocate for using OF-Graph for those devices.
> 
> Those are different, there's no data stream independent of the control
> communications.

Fine, then you have Ethernet PHYs, or any MMIO device that does DMA.

> > > The device tree describes a control hierarchy between devices. OF graph
> > > overlays on top of that a data transfer graph. The two are different
> > > concepts, and the fact that DSI can sometimes be used as a control bus
> > > doesn't change the concept. Using OF graph unconditionally to describe
> > > the data connections for DSI leads to less variation in the device tree
> > > structure, and thus less complexity in the implementation. We're
> > > suffering from the fact we haven't made it a requirement in the first
> > > place, which can't be fixed due to ABI breakage constraints, but let's
> > > not acknowledge it as a good idea.
> > 
> > Honestly, it doesn't matter one bit.
> > 
> > We have a huge discrepancy here today, and only a couple of bridges have
> > that arbitrary restriction. The situation you don't want to acknowledge
> > is the de-facto standard, by the generic binding and by what all the
> > bridges and panels are implementing. Even panel-simple-dsi is doing it.
> > So it's very much there already.
> 
> It's here, and I think we should move away from it for new DSI sinks.
> I'd like OF graph to be used consistently for new drivers. We can't
> change existing DT bindings and drivers to drop support for the
> non-OF-graph description due to ABI stability, but we can avoid
> repeating the mistake going forward.
>
> > What I'm trying to address here is that some controllers that do
> > everything right can't be used because that restriction is completely
> > arbitrary and in opposition to the consensus. And they can't be used
> > *today*.
> > 
> > If we want to change that consensus, fine, but we should still have one.
> > Having some bridges enforcing custom rules for no reason is very much
> > unacceptable.
> > 
> > And changing that consensus won't happen overtime, we'll have to take
> > care of the backward compatibility, etc. So it won't fix the issue that
> > we can't use any bridge with any controller any time soon.
> 
> I don't think that's the issue at hand here. You can still use a
> non-OF-graph DT event if the nodes for the two bridges affected by this
> patch define a port at 0. It can just be left unconnected.
> 
> I do agree it will cause some DT bindings for DCS-based DSI sinks to
> have ports will others won't. If your concern is that all DT bindings
> should be coherent, would you be OK with a patch that makes the sink
> port mandatory in all DT bindings for DSI bridges and panels (and fixes
> the mainline DT sources accordingly to make sure they validate) ? The
> port would not be connected of course (at least when used with DSI
> source drivers that don't use OF graph today). That would make DT
> bindings coherent, and would be a first step towards using OF graph
> everywhere.

I'm trying to fix a (recent) mistake/cargo-cult in new bindings. That
discussion is not going to be fairly controversial and I don't see how
that can be solved quickly. So, as a second step, why not. But this one
needs to come first.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20220324/588954fe/attachment-0001.sig>