[PATCH v4 00/11] drm/bridge: tc358767: Add DSI-to-DPI mode support

[Lucas Stach]

Hi Marek,

Am Montag, dem 28.03.2022 um 23:43 +0200 schrieb Marek Vasut:
> The TC358767/TC358867/TC9595 are all capable of operating in multiple
> modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Clean up the driver,
> switch to atomic ops, and add support for the DSI-to-DPI mode in
> addition to already supported DPI-to-(e)DP mode.
> 
Not sure if anyone else has any more comments. For what it is worth, I
just skimmed through the series again and it looks good to me now.

Regards,
Lucas

> Cc: Jonas Karlman <jonas at kwiboo.se>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Maxime Ripard <maxime at cerno.tech>
> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> To: dri-devel at lists.freedesktop.org
> 
> Marek Vasut (11):
>   dt-bindings: display: bridge: tc358867: Document DPI output support
>   dt-bindings: display: bridge: tc358867: Document DSI data-lanes
>     property
>   drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific
>     functions
>   drm/bridge: tc358767: Convert to atomic ops
>   drm/bridge: tc358767: Implement atomic_check callback
>   drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into
>     dedicated function
>   drm/bridge: tc358767: Wrap (e)DP aux I2C registration into
>     tc_aux_link_setup()
>   drm/bridge: tc358767: Move bridge ops setup into
>     tc_probe_edp_bridge_endpoint()
>   drm/bridge: tc358767: Detect bridge mode from connected endpoints in
>     DT
>   drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP
>     part
>   drm/bridge: tc358767: Add DSI-to-DPI mode support
> 
>  .../display/bridge/toshiba,tc358767.yaml      |  22 +-
>  drivers/gpu/drm/bridge/Kconfig                |   1 +
>  drivers/gpu/drm/bridge/tc358767.c             | 566 ++++++++++++++++--
>  3 files changed, 529 insertions(+), 60 deletions(-)
>