[PATCH v5 10/11] drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part
Marek Vasut
marex at denx.de
Tue Mar 29 08:50:14 UTC 2022
The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
Tested-by: Lucas Stach <l.stach at pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Maxime Ripard <maxime at cerno.tech>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: Drop unused variables from tc_set_common_video_mode()
---
drivers/gpu/drm/bridge/tc358767.c | 65 ++++++++++++++++++-------------
1 file changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index dd324cf16e4d0..02f9cea738d21 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -734,33 +734,16 @@ static int tc_get_display_props(struct tc_data *tc)
return ret;
}
-static int tc_set_video_mode(struct tc_data *tc,
- const struct drm_display_mode *mode)
+static int tc_set_common_video_mode(struct tc_data *tc,
+ const struct drm_display_mode *mode)
{
- int ret;
- int vid_sync_dly;
- int max_tu_symbol;
-
int left_margin = mode->htotal - mode->hsync_end;
int right_margin = mode->hsync_start - mode->hdisplay;
int hsync_len = mode->hsync_end - mode->hsync_start;
int upper_margin = mode->vtotal - mode->vsync_end;
int lower_margin = mode->vsync_start - mode->vdisplay;
int vsync_len = mode->vsync_end - mode->vsync_start;
- u32 dp0_syncval;
- u32 bits_per_pixel = 24;
- u32 in_bw, out_bw;
-
- /*
- * Recommended maximum number of symbols transferred in a transfer unit:
- * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
- * (output active video bandwidth in bytes))
- * Must be less than tu_size.
- */
-
- in_bw = mode->clock * bits_per_pixel / 8;
- out_bw = tc->link.num_lanes * tc->link.rate;
- max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
+ int ret;
dev_dbg(tc->dev, "set mode %dx%d\n",
mode->hdisplay, mode->vdisplay);
@@ -818,8 +801,35 @@ static int tc_set_video_mode(struct tc_data *tc,
FIELD_PREP(COLOR_B, 99) |
ENI2CFILTER |
FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
- if (ret)
- return ret;
+
+ return ret;
+}
+
+static int tc_set_edp_video_mode(struct tc_data *tc,
+ const struct drm_display_mode *mode)
+{
+ int ret;
+ int vid_sync_dly;
+ int max_tu_symbol;
+
+ int left_margin = mode->htotal - mode->hsync_end;
+ int hsync_len = mode->hsync_end - mode->hsync_start;
+ int upper_margin = mode->vtotal - mode->vsync_end;
+ int vsync_len = mode->vsync_end - mode->vsync_start;
+ u32 dp0_syncval;
+ u32 bits_per_pixel = 24;
+ u32 in_bw, out_bw;
+
+ /*
+ * Recommended maximum number of symbols transferred in a transfer unit:
+ * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+ * (output active video bandwidth in bytes))
+ * Must be less than tu_size.
+ */
+
+ in_bw = mode->clock * bits_per_pixel / 8;
+ out_bw = tc->link.num_lanes * tc->link.rate;
+ max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
/* DP Main Stream Attributes */
vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
@@ -869,10 +879,7 @@ static int tc_set_video_mode(struct tc_data *tc,
FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
BPC_8);
- if (ret)
- return ret;
-
- return 0;
+ return ret;
}
static int tc_wait_link_training(struct tc_data *tc)
@@ -1185,7 +1192,11 @@ static int tc_edp_stream_enable(struct tc_data *tc)
return ret;
}
- ret = tc_set_video_mode(tc, &tc->mode);
+ ret = tc_set_common_video_mode(tc, &tc->mode);
+ if (ret)
+ return ret;
+
+ ret = tc_set_edp_video_mode(tc, &tc->mode);
if (ret)
return ret;
--
2.35.1
More information about the dri-devel
mailing list