[PATCH v6 08/11] drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()

[Marek Vasut]

The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
Tested-by: Lucas Stach <l.stach at pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Maxime Ripard <maxime at cerno.tech>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
---
V2: - New patch
V3: - No change
V4: - Add RB/TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8a8b495aa0ad..8c468f77618d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1613,6 +1613,11 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 		tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
 	}
 
+	tc->bridge.funcs = &tc_edp_bridge_funcs;
+	if (tc->hpd_pin >= 0)
+		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
+	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
+
 	return ret;
 }
 
@@ -1742,11 +1747,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (ret)
 		return ret;
 
-	tc->bridge.funcs = &tc_edp_bridge_funcs;
-	if (tc->hpd_pin >= 0)
-		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
-	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
-
 	tc->bridge.of_node = dev->of_node;
 	drm_bridge_add(&tc->bridge);
 
-- 
2.35.1