[Intel-gfx] [PATCH v2 14/20] drm/edid: convert drm_edid_to_eld() to use cea db iter
Jani Nikula
jani.nikula at intel.com
Tue May 3 09:23:59 UTC 2022
Iterate through all CTA data blocks across all CTA extensions and
DisplayID data blocks. This may gather more data than before, and if
there's duplicated data, some is overwritten by whichever comes last.
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/drm_edid.c | 64 +++++++++++++++++---------------------
1 file changed, 29 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 98b2e6164468..77986895e501 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4911,12 +4911,12 @@ static void clear_eld(struct drm_connector *connector)
static void drm_edid_to_eld(struct drm_connector *connector,
const struct edid *edid)
{
+ const struct cea_db *db;
+ struct cea_db_iter iter;
uint8_t *eld = connector->eld;
const u8 *cea;
- const u8 *db;
int total_sad_count = 0;
int mnl;
- int dbl;
clear_eld(connector);
@@ -4942,43 +4942,37 @@ static void drm_edid_to_eld(struct drm_connector *connector,
eld[DRM_ELD_PRODUCT_CODE0] = edid->prod_code[0];
eld[DRM_ELD_PRODUCT_CODE1] = edid->prod_code[1];
- if (cea_revision(cea) >= 3) {
- int i, start, end;
+ cea_db_iter_edid_begin(edid, &iter);
+ cea_db_iter_for_each(db, &iter) {
+ const u8 *data = cea_db_data(db);
+ int len = cea_db_payload_len(db);
int sad_count;
- if (cea_db_offsets(cea, &start, &end)) {
- start = 0;
- end = 0;
- }
-
- for_each_cea_db(cea, i, start, end) {
- db = &cea[i];
- dbl = cea_db_payload_len(db);
-
- switch (cea_db_tag(db)) {
- case CTA_DB_AUDIO:
- /* Audio Data Block, contains SADs */
- sad_count = min(dbl / 3, 15 - total_sad_count);
- if (sad_count >= 1)
- memcpy(&eld[DRM_ELD_CEA_SAD(mnl, total_sad_count)],
- &db[1], sad_count * 3);
- total_sad_count += sad_count;
- break;
- case CTA_DB_SPEAKER:
- /* Speaker Allocation Data Block */
- if (dbl >= 1)
- eld[DRM_ELD_SPEAKER] = db[1];
- break;
- case CTA_DB_VENDOR:
- /* HDMI Vendor-Specific Data Block */
- if (cea_db_is_hdmi_vsdb(db))
- drm_parse_hdmi_vsdb_audio(connector, db);
- break;
- default:
- break;
- }
+ switch (cea_db_tag(db)) {
+ case CTA_DB_AUDIO:
+ /* Audio Data Block, contains SADs */
+ sad_count = min(len / 3, 15 - total_sad_count);
+ if (sad_count >= 1)
+ memcpy(&eld[DRM_ELD_CEA_SAD(mnl, total_sad_count)],
+ data, sad_count * 3);
+ total_sad_count += sad_count;
+ break;
+ case CTA_DB_SPEAKER:
+ /* Speaker Allocation Data Block */
+ if (len >= 1)
+ eld[DRM_ELD_SPEAKER] = data[0];
+ break;
+ case CTA_DB_VENDOR:
+ /* HDMI Vendor-Specific Data Block */
+ if (cea_db_is_hdmi_vsdb(db))
+ drm_parse_hdmi_vsdb_audio(connector, (const u8 *)db);
+ break;
+ default:
+ break;
}
}
+ cea_db_iter_end(&iter);
+
eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= total_sad_count << DRM_ELD_SAD_COUNT_SHIFT;
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
--
2.30.2
More information about the dri-devel
mailing list