[PATCH 1/2] dma-buf: Add an API for exporting sync files (v13)
Jason Ekstrand
jason at jlekstrand.net
Thu May 5 08:05:44 UTC 2022
On Wed, May 4, 2022 at 5:49 PM Daniel Vetter <daniel at ffwll.ch> wrote:
> On Wed, May 04, 2022 at 03:34:03PM -0500, Jason Ekstrand wrote:
> > Modern userspace APIs like Vulkan are built on an explicit
> > synchronization model. This doesn't always play nicely with the
> > implicit synchronization used in the kernel and assumed by X11 and
> > Wayland. The client -> compositor half of the synchronization isn't too
> > bad, at least on intel, because we can control whether or not i915
> > synchronizes on the buffer and whether or not it's considered written.
> >
> > The harder part is the compositor -> client synchronization when we get
> > the buffer back from the compositor. We're required to be able to
> > provide the client with a VkSemaphore and VkFence representing the point
> > in time where the window system (compositor and/or display) finished
> > using the buffer. With current APIs, it's very hard to do this in such
> > a way that we don't get confused by the Vulkan driver's access of the
> > buffer. In particular, once we tell the kernel that we're rendering to
> > the buffer again, any CPU waits on the buffer or GPU dependencies will
> > wait on some of the client rendering and not just the compositor.
> >
> > This new IOCTL solves this problem by allowing us to get a snapshot of
> > the implicit synchronization state of a given dma-buf in the form of a
> > sync file. It's effectively the same as a poll() or I915_GEM_WAIT only,
> > instead of CPU waiting directly, it encapsulates the wait operation, at
> > the current moment in time, in a sync_file so we can check/wait on it
> > later. As long as the Vulkan driver does the sync_file export from the
> > dma-buf before we re-introduce it for rendering, it will only contain
> > fences from the compositor or display. This allows to accurately turn
> > it into a VkFence or VkSemaphore without any over-synchronization.
> >
> > By making this an ioctl on the dma-buf itself, it allows this new
> > functionality to be used in an entirely driver-agnostic way without
> > having access to a DRM fd. This makes it ideal for use in driver-generic
> > code in Mesa or in a client such as a compositor where the DRM fd may be
> > hard to reach.
> >
> > v2 (Jason Ekstrand):
> > - Use a wrapper dma_fence_array of all fences including the new one
> > when importing an exclusive fence.
> >
> > v3 (Jason Ekstrand):
> > - Lock around setting shared fences as well as exclusive
> > - Mark SIGNAL_SYNC_FILE as a read-write ioctl.
> > - Initialize ret to 0 in dma_buf_wait_sync_file
> >
> > v4 (Jason Ekstrand):
> > - Use the new dma_resv_get_singleton helper
> >
> > v5 (Jason Ekstrand):
> > - Rename the IOCTLs to import/export rather than wait/signal
> > - Drop the WRITE flag and always get/set the exclusive fence
> >
> > v6 (Jason Ekstrand):
> > - Drop the sync_file import as it was all-around sketchy and not nearly
> > as useful as import.
> > - Re-introduce READ/WRITE flag support for export
> > - Rework the commit message
> >
> > v7 (Jason Ekstrand):
> > - Require at least one sync flag
> > - Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference
> > - Use _rcu helpers since we're accessing the dma_resv read-only
> >
> > v8 (Jason Ekstrand):
> > - Return -ENOMEM if the sync_file_create fails
> > - Predicate support on IS_ENABLED(CONFIG_SYNC_FILE)
> >
> > v9 (Jason Ekstrand):
> > - Add documentation for the new ioctl
> >
> > v10 (Jason Ekstrand):
> > - Go back to dma_buf_sync_file as the ioctl struct name
> >
> > v11 (Daniel Vetter):
> > - Go back to dma_buf_export_sync_file as the ioctl struct name
> > - Better kerneldoc describing what the read/write flags do
> >
> > v12 (Christian König):
> > - Document why we chose to make it an ioctl on dma-buf
> >
> > v12 (Jason Ekstrand):
> > - Rebase on Christian König's fence rework
> >
> > Signed-off-by: Jason Ekstrand <jason at jlekstrand.net>
> > Acked-by: Simon Ser <contact at emersion.fr>
> > Acked-by: Christian König <christian.koenig at amd.com>
> > Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> Not sure which version it was that I reviewed, but with dma_resv_usage
> this all looks neat and tidy. One nit below.
>
> > Cc: Sumit Semwal <sumit.semwal at linaro.org>
> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > ---
> > drivers/dma-buf/dma-buf.c | 64 ++++++++++++++++++++++++++++++++++++
> > include/uapi/linux/dma-buf.h | 35 ++++++++++++++++++++
> > 2 files changed, 99 insertions(+)
> >
> > diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> > index 79795857be3e..529e0611e53b 100644
> > --- a/drivers/dma-buf/dma-buf.c
> > +++ b/drivers/dma-buf/dma-buf.c
> > @@ -20,6 +20,7 @@
> > #include <linux/debugfs.h>
> > #include <linux/module.h>
> > #include <linux/seq_file.h>
> > +#include <linux/sync_file.h>
> > #include <linux/poll.h>
> > #include <linux/dma-resv.h>
> > #include <linux/mm.h>
> > @@ -192,6 +193,9 @@ static loff_t dma_buf_llseek(struct file *file,
> loff_t offset, int whence)
> > * Note that this only signals the completion of the respective fences,
> i.e. the
> > * DMA transfers are complete. Cache flushing and any other necessary
> > * preparations before CPU access can begin still need to happen.
> > + *
> > + * As an alternative to poll(), the set of fences on DMA buffer can be
> > + * exported as a &sync_file using &dma_buf_sync_file_export.
> > */
> >
> > static void dma_buf_poll_cb(struct dma_fence *fence, struct
> dma_fence_cb *cb)
> > @@ -326,6 +330,61 @@ static long dma_buf_set_name(struct dma_buf
> *dmabuf, const char __user *buf)
> > return 0;
> > }
> >
> > +#if IS_ENABLED(CONFIG_SYNC_FILE)
> > +static long dma_buf_export_sync_file(struct dma_buf *dmabuf,
> > + void __user *user_data)
> > +{
> > + struct dma_buf_export_sync_file arg;
> > + enum dma_resv_usage usage;
> > + struct dma_fence *fence = NULL;
> > + struct sync_file *sync_file;
> > + int fd, ret;
> > +
> > + if (copy_from_user(&arg, user_data, sizeof(arg)))
> > + return -EFAULT;
> > +
> > + if (arg.flags & ~DMA_BUF_SYNC_RW)
> > + return -EINVAL;
> > +
> > + if ((arg.flags & DMA_BUF_SYNC_RW) == 0)
> > + return -EINVAL;
>
> We allow userspace to set both SYNC_READ and SYNC_WRITE here, I think
>
> if ((arg.flags & DMA_BUF_SYNC_RW) == DMA_BUF_SYNC_RW)
> return -EINVAL;
>
> is missing?
>
We could, but I don't really get why we should disallow that. SYNC_READ |
SYNC_WRITE is the same as SYNC_WRITE and that seems like perfectly sane
behavior to me.
--Jason
> Also maybe a case to add to your igt.
>
> > +
> > + fd = get_unused_fd_flags(O_CLOEXEC);
> > + if (fd < 0)
> > + return fd;
> > +
> > + usage = (arg.flags & DMA_BUF_SYNC_WRITE) ? DMA_RESV_USAGE_WRITE :
> > + DMA_RESV_USAGE_READ;
> > + ret = dma_resv_get_singleton(dmabuf->resv, usage, &fence);
> > + if (ret)
> > + goto err_put_fd;
> > +
> > + if (!fence)
> > + fence = dma_fence_get_stub();
> > +
> > + sync_file = sync_file_create(fence);
> > +
> > + dma_fence_put(fence);
> > +
> > + if (!sync_file) {
> > + ret = -ENOMEM;
> > + goto err_put_fd;
> > + }
> > +
> > + fd_install(fd, sync_file->file);
> > +
> > + arg.fd = fd;
> > + if (copy_to_user(user_data, &arg, sizeof(arg)))
> > + return -EFAULT;
> > +
> > + return 0;
> > +
> > +err_put_fd:
> > + put_unused_fd(fd);
> > + return ret;
> > +}
> > +#endif
> > +
> > static long dma_buf_ioctl(struct file *file,
> > unsigned int cmd, unsigned long arg)
> > {
> > @@ -369,6 +428,11 @@ static long dma_buf_ioctl(struct file *file,
> > case DMA_BUF_SET_NAME_B:
> > return dma_buf_set_name(dmabuf, (const char __user *)arg);
> >
> > +#if IS_ENABLED(CONFIG_SYNC_FILE)
> > + case DMA_BUF_IOCTL_EXPORT_SYNC_FILE:
> > + return dma_buf_export_sync_file(dmabuf, (void __user
> *)arg);
> > +#endif
> > +
> > default:
> > return -ENOTTY;
> > }
> > diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
> > index 8e4a2ca0bcbf..46f1e3e98b02 100644
> > --- a/include/uapi/linux/dma-buf.h
> > +++ b/include/uapi/linux/dma-buf.h
> > @@ -85,6 +85,40 @@ struct dma_buf_sync {
> >
> > #define DMA_BUF_NAME_LEN 32
> >
> > +/**
> > + * struct dma_buf_export_sync_file - Get a sync_file from a dma-buf
> > + *
> > + * Userspace can perform a DMA_BUF_IOCTL_EXPORT_SYNC_FILE to retrieve
> the
> > + * current set of fences on a dma-buf file descriptor as a sync_file.
> CPU
> > + * waits via poll() or other driver-specific mechanisms typically wait
> on
> > + * whatever fences are on the dma-buf at the time the wait begins. This
> > + * is similar except that it takes a snapshot of the current fences on
> the
> > + * dma-buf for waiting later instead of waiting immediately. This is
> > + * useful for modern graphics APIs such as Vulkan which assume an
> explicit
> > + * synchronization model but still need to inter-operate with dma-buf.
> > + */
> > +struct dma_buf_export_sync_file {
> > + /**
> > + * @flags: Read/write flags
> > + *
> > + * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both.
> > + *
> > + * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set,
> > + * the returned sync file waits on any writers of the dma-buf to
> > + * complete. Waiting on the returned sync file is equivalent to
> > + * poll() with POLLIN.
> > + *
> > + * If DMA_BUF_SYNC_WRITE is set, the returned sync file waits on
> > + * any users of the dma-buf (read or write) to complete. Waiting
> > + * on the returned sync file is equivalent to poll() with POLLOUT.
> > + * If both DMA_BUF_SYNC_WRITE and DMA_BUF_SYNC_READ are set, this
> > + * is equivalent to just DMA_BUF_SYNC_WRITE.
> > + */
> > + __u32 flags;
> > + /** @fd: Returned sync file descriptor */
> > + __s32 fd;
> > +};
> > +
> > #define DMA_BUF_BASE 'b'
> > #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
> >
> > @@ -94,5 +128,6 @@ struct dma_buf_sync {
> > #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *)
> > #define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32)
> > #define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64)
> > +#define DMA_BUF_IOCTL_EXPORT_SYNC_FILE _IOWR(DMA_BUF_BASE, 2,
> struct dma_buf_export_sync_file)
>
> With the one nit fixed for this version:
>
> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> >
> > #endif
> > --
> > 2.36.0
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20220505/48b5328f/attachment-0001.htm>
More information about the dri-devel
mailing list