[PATCH] drm/amd/display: add parameter backlight_min
Harry Wentland
harry.wentland at amd.com
Wed Nov 2 14:57:46 UTC 2022
On 2022-11-01 11:33, Filip Moc wrote:
> Hello Harry,
>
> thank you for your response.
>
>> amdgpu.backlight_min=2:-1
>
> almost :-)
>
> Array elements in module parameters are separated by commas not colons.
> So for cmdline it should look like this:
> amdgpu.backlight_min=2,-1
>
> Though you can just drop the ,-1 relying on kernel leaving the rest of array
> untouched. Which I would recommend as there is no point for user to
> follow AMDGPU_DM_MAX_NUM_EDP.
> Only when you need to override some other display than display 0 then you may
> need to use -1. E.g. backlight_min=-1,2 overrides display 1 to min backlight=2
> while keeping display 0 with no override.
>
> When amdgpu is loaded as a kernel module, backlight_min can also be passed as a
> parameter to modprobe, e.g.:
> modprobe backlight_min=2
> So in that case you probably want to add something like
> options amdgpu backlight_min=2 to /etc/modprobe.d/amdgpu.conf
> (and also run update-initramfs if amdgpu is loaded by initramfs).
>
> I'll add some examples to commit message in v2.
>
Awesome. Thanks.
Harry
> Filip
>
>
> V Mon, Oct 31, 2022 at 10:24:25AM -0400, Harry Wentland napsal(a):
>> On 2022-10-29 15:13, Filip Moc wrote:
>>> There are some devices on which amdgpu won't allow user to set brightness
>>> to sufficiently low values even though the hardware would support it just
>>> fine.
>>>
>>> This usually happens in two cases when either configuration of brightness
>>> levels via ACPI/ATIF is not available and amdgpu falls back to defaults
>>> (currently 12 for minimum level) which may be too high for some devices or
>>> even the configuration via ATIF is available but the minimum brightness
>>> level provided by the manufacturer is set to unreasonably high value.
>>>
>>> In either case user can use this new module parameter to adjust the
>>> minimum allowed backlight brightness level.
>>>
>>
>> Thanks for this patch and covering all the bases.
>>
>> It might be useful to have an example in the commit description on
>> how to set the array property. I assume it looks like this if I
>> wanted to set the first device to a minimum of 2 and leave the default
>> for the 2nd one:
>>
>> amdgpu.backlight_min=2:-1
>>
>> Either way, this patch is
>> Reviewed-by: Harry Wentland <harry.wentland at amd.com>
>>
>> Harry
>>
>>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203439
>>> Signed-off-by: Filip Moc <dev at moc6.cz>
>>> ---
>>> drivers/gpu/drm/amd/amdgpu/amdgpu.h | 3 +++
>>> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 15 +++++++++++++++
>>> drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++++++++++++++
>>> 3 files changed, 33 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>> index 0e6ddf05c23c..c5445402c49d 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>> @@ -200,6 +200,9 @@ extern uint amdgpu_dc_debug_mask;
>>> extern uint amdgpu_dc_visual_confirm;
>>> extern uint amdgpu_dm_abm_level;
>>> extern int amdgpu_backlight;
>>> +#ifdef CONFIG_DRM_AMD_DC
>>> +extern int amdgpu_backlight_override_min[];
>>> +#endif
>>> extern struct amdgpu_mgpu_info mgpu_info;
>>> extern int amdgpu_ras_enable;
>>> extern uint amdgpu_ras_mask;
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>>> index 16f6a313335e..f2fb549ac52f 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>>> @@ -43,6 +43,7 @@
>>> #include "amdgpu_irq.h"
>>> #include "amdgpu_dma_buf.h"
>>> #include "amdgpu_sched.h"
>>> +#include "amdgpu_dm.h"
>>> #include "amdgpu_fdinfo.h"
>>> #include "amdgpu_amdkfd.h"
>>>
>>> @@ -853,6 +854,20 @@ int amdgpu_backlight = -1;
>>> MODULE_PARM_DESC(backlight, "Backlight control (0 = pwm, 1 = aux, -1 auto (default))");
>>> module_param_named(backlight, amdgpu_backlight, bint, 0444);
>>>
>>> +/**
>>> + * DOC: backlight_min (array of int)
>>> + * Override minimum allowed backlight brightness signal (per display).
>>> + * Must be less than the maximum brightness signal.
>>> + * Negative value means no override.
>>> + *
>>> + * Defaults to all -1 (no override on any display).
>>> + */
>>> +#ifdef CONFIG_DRM_AMD_DC
>>> +int amdgpu_backlight_override_min[AMDGPU_DM_MAX_NUM_EDP] = {[0 ... (AMDGPU_DM_MAX_NUM_EDP-1)] = -1};
>>> +MODULE_PARM_DESC(backlight_min, "Override minimum backlight brightness signal (0..max-1, -1 = no override (default))");
>>> +module_param_array_named(backlight_min, amdgpu_backlight_override_min, int, NULL, 0444);
>>> +#endif
>>> +
>>> /**
>>> * DOC: tmz (int)
>>> * Trusted Memory Zone (TMZ) is a method to protect data being written
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> index eb4ce7216104..e2c36ba93d05 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> @@ -3911,6 +3911,21 @@ static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm,
>>> dm->backlight_caps[bl_idx].min_input_signal = AMDGPU_DM_DEFAULT_MIN_BACKLIGHT;
>>> dm->backlight_caps[bl_idx].max_input_signal = AMDGPU_DM_DEFAULT_MAX_BACKLIGHT;
>>> #endif
>>> +
>>> + if (amdgpu_backlight_override_min[bl_idx] >= 0) {
>>> + if (amdgpu_backlight_override_min[bl_idx] < dm->backlight_caps[bl_idx].max_input_signal) {
>>> + DRM_INFO("amdgpu: backlight[%i]: overriding minimum brightness from %i to %i\n",
>>> + bl_idx,
>>> + dm->backlight_caps[bl_idx].min_input_signal,
>>> + amdgpu_backlight_override_min[bl_idx]);
>>> + dm->backlight_caps[bl_idx].min_input_signal = amdgpu_backlight_override_min[bl_idx];
>>> + } else {
>>> + DRM_ERROR("amdgpu: backlight[%i]: minimum brightness override (%i) is not below maximum (%i)\n",
>>> + bl_idx,
>>> + amdgpu_backlight_override_min[bl_idx],
>>> + dm->backlight_caps[bl_idx].max_input_signal);
>>> + }
>>> + }
>>> }
>>>
>>> static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
>>>
>>> base-commit: d8c03bfe146fd5e081a252cd34f3f12ca0255357
>>
More information about the dri-devel
mailing list