[PATCH RESEND 04/13] omapfb: encoder-tfp410: switch to using gpiod API
Dmitry Torokhov
dmitry.torokhov at gmail.com
Fri Nov 4 03:16:33 UTC 2022
Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
.../fbdev/omap2/omapfb/displays/encoder-tfp410.c | 67 +++++++---------------
1 file changed, 22 insertions(+), 45 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
index 09a59bd93d61..7bac420169a6 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
@@ -6,11 +6,12 @@
* Author: Tomi Valkeinen <tomi.valkeinen at ti.com>
*/
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/of_gpio.h>
#include <video/omapfb_dss.h>
@@ -18,7 +19,8 @@ struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
- int pd_gpio;
+ struct gpio_desc *pd_gpio;
+
int data_lines;
struct omap_video_timings timings;
@@ -86,8 +88,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
if (r)
return r;
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_set_value_cansleep(ddata->pd_gpio, 1);
+ if (ddata->pd_gpio)
+ gpiod_set_value_cansleep(ddata->pd_gpio, 0);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
@@ -102,8 +104,8 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
if (!omapdss_device_is_enabled(dssdev))
return;
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_set_value_cansleep(ddata->pd_gpio, 0);
+ if (ddata->pd_gpio)
+ gpiod_set_value_cansleep(ddata->pd_gpio, 1);
in->ops.dpi->disable(in);
@@ -162,33 +164,6 @@ static const struct omapdss_dvi_ops tfp410_dvi_ops = {
.get_timings = tfp410_get_timings,
};
-static int tfp410_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct device_node *node = pdev->dev.of_node;
- struct omap_dss_device *in;
- int gpio;
-
- gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
-
- if (gpio_is_valid(gpio) || gpio == -ENOENT) {
- ddata->pd_gpio = gpio;
- } else {
- dev_err(&pdev->dev, "failed to parse PD gpio\n");
- return gpio;
- }
-
- in = omapdss_of_find_source_for_first_ep(node);
- if (IS_ERR(in)) {
- dev_err(&pdev->dev, "failed to find video source\n");
- return PTR_ERR(in);
- }
-
- ddata->in = in;
-
- return 0;
-}
-
static int tfp410_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -204,18 +179,21 @@ static int tfp410_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ddata);
- r = tfp410_probe_of(pdev);
- if (r)
+ ddata->pd_gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ r = PTR_ERR_OR_ZERO(ddata->pd_gpio);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to request PD GPIO: %d\n", r);
return r;
+ }
+
+ gpiod_set_consumer_name(ddata->pd_gpio, "tfp410 PD");
- if (gpio_is_valid(ddata->pd_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
- GPIOF_OUT_INIT_LOW, "tfp410 PD");
- if (r) {
- dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
- ddata->pd_gpio);
- goto err_gpio;
- }
+ ddata->in = omapdss_of_find_source_for_first_ep(pdev->dev.of_node);
+ r = PTR_ERR_OR_ZERO(ddata->in);
+ if (r) {
+ dev_err(&pdev->dev, "failed to find video source: %d\n", r);
+ return r;
}
dssdev = &ddata->dssdev;
@@ -235,7 +213,6 @@ static int tfp410_probe(struct platform_device *pdev)
return 0;
err_reg:
-err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
--
b4 0.11.0-dev-28747
More information about the dri-devel
mailing list