[PATCH RESEND 11/13] omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
Dmitry Torokhov
dmitry.torokhov at gmail.com
Fri Nov 4 03:16:40 UTC 2022
With f048e8c1d169 ("omapfb: panel-lgphilips-lb035q02: Remove legacy boot
support") it is no longer possible to specify GPIO to control the
backlight. Remove code trying to request and toggle it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
.../omapfb/displays/panel-lgphilips-lb035q02.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
index 3ce1f9d2e7c4..e69856cb62d5 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
@@ -11,7 +11,7 @@
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/mutex.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <video/omapfb_dss.h>
@@ -46,9 +46,6 @@ struct panel_drv_data {
struct omap_video_timings videomode;
- /* used for non-DT boot, to be removed */
- int backlight_gpio;
-
struct gpio_desc *enable_gpio;
};
@@ -166,9 +163,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
- if (gpio_is_valid(ddata->backlight_gpio))
- gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
@@ -185,9 +179,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
- if (gpio_is_valid(ddata->backlight_gpio))
- gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
in->ops.dpi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -250,8 +241,6 @@ static int lb035q02_probe_of(struct spi_device *spi)
ddata->enable_gpio = gpio;
- ddata->backlight_gpio = -ENOENT;
-
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&spi->dev, "failed to find video source\n");
@@ -284,13 +273,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
if (r)
return r;
- if (gpio_is_valid(ddata->backlight_gpio)) {
- r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
- GPIOF_OUT_INIT_LOW, "panel backlight");
- if (r)
- goto err_gpio;
- }
-
ddata->videomode = lb035q02_timings;
dssdev = &ddata->dssdev;
@@ -310,7 +292,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
return 0;
err_reg:
-err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
--
b4 0.11.0-dev-28747
More information about the dri-devel
mailing list