[v2 07/10] dts-bindings: phy: Add Cadence HDP-TX DP PHY bindings

[Krzysztof Kozlowski]

On 04/11/2022 02:44, Sandor Yu wrote:
> Add bindings for Cadence HDP-TX DisplayPort PHY.
> 
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
>  .../bindings/phy/phy-cadence-hdptx-dp.yaml    | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml
> new file mode 100644
> index 000000000000..ab6f4e25c425
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml

Use filename matching compatible, so cdns,hdptx-dp-phy.yaml

> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/phy-cadence-hdptx-dp.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

Drop quotes from both lines.

> +
> +title: Cadence HDP(HDMI/DisplayPort) TX PHY for DisplayPort protocol binding

Drop binding

> +
> +description:
> +  This binding describes the Cadence HDP-TX PHY for DispalyPort protocol.

Drop "This binding describes"

> +
> +maintainers:
> +  - Sandor Yu <sandor.yu at nxp.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,hdptx-dp-phy
> +
> +  reg:
> +    description:
> +      Offset of Cadence HDPTX APB configuration registers.

Same comments as usual.

> +
> +  clocks:
> +    items:
> +      description:
> +        PHY reference clock. Must contain an entry in clock-names.

Drop "Must contain an entry in clock-names."

> +
> +  clock-names:
> +    items:
> +      - const: refclk
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  cdns,num-lanes:
> +    description:
> +      Number of lanes.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 3, 4]
> +    default: 4
> +
> +  cdns,max-bit-rate:
> +    description:
> +      Maximum DisplayPort link bit rate to use, in Mbps
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [2160, 2430, 2700, 3240, 4320, 5400]
> +    default: 5400
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/phy/phy.h>
> +    dp_phy: dp_phy at 32c00000 {

phy
(and no underscores in node names)

> +        compatible = "cdns,hdptx-dp-phy";
> +        reg = <0x32c00000 0x100000>;
> +        #phy-cells = <0>;
> +        clocks = <&hdmi_phy_27m>;
> +        clock-names = "refclk";
> +        cdns,num-lanes = <4>;
> +        cdns,max-bit-rate = <5400>;
> +    };

Best regards,
Krzysztof