[PATCH v3 02/12] dt-bindings: display: mediatek: add MT8195 hdmi bindings

Guillaume Ranquet granquet at baylibre.com
Fri Nov 4 14:09:48 UTC 2022


Add mt8195 SoC bindings for hdmi and hdmi-ddc

On mt8195 the ddc i2c controller is part of the hdmi IP block and thus has no
specific register range, power domain or interrupt, making it simpler
than its the legacy "mediatek,hdmi-ddc" binding.

Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
---
 .../bindings/display/mediatek/mediatek,hdmi.yaml   | 61 ++++++++++++++++++----
 .../display/mediatek/mediatek,mt8195-hdmi-ddc.yaml | 51 ++++++++++++++++++
 2 files changed, 101 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index bdaf0b51e68c..9710b7b6e9bf 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -21,6 +21,7 @@ properties:
       - mediatek,mt7623-hdmi
       - mediatek,mt8167-hdmi
       - mediatek,mt8173-hdmi
+      - mediatek,mt8195-hdmi
 
   reg:
     maxItems: 1
@@ -29,18 +30,12 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: Pixel Clock
-      - description: HDMI PLL
-      - description: Bit Clock
-      - description: S/PDIF Clock
+    minItems: 4
+    maxItems: 4
 
   clock-names:
-    items:
-      - const: pixel
-      - const: pll
-      - const: bclk
-      - const: spdif
+    minItems: 4
+    maxItems: 4
 
   phys:
     maxItems: 1
@@ -58,6 +53,9 @@ properties:
     description: |
       phandle link and register offset to the system configuration registers.
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -86,9 +84,50 @@ required:
   - clock-names
   - phys
   - phy-names
-  - mediatek,syscon-hdmi
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: APB
+            - description: HDCP
+            - description: HDCP 24M
+            - description: Split HDMI
+        clock-names:
+          items:
+            - const: hdmi_apb_sel
+            - const: hdcp_sel
+            - const: hdcp24_sel
+            - const: split_hdmi
+
+      required:
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Pixel Clock
+            - description: HDMI PLL
+            - description: Bit Clock
+            - description: S/PDIF Clock
+
+        clock-names:
+          items:
+            - const: pixel
+            - const: pll
+            - const: bclk
+            - const: spdif
+
+      required:
+        - mediatek,syscon-hdmi
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
new file mode 100644
index 000000000000..2dc273689584
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI DDC for mt8195
+
+maintainers:
+  - CK Hu <ck.hu at mediatek.com>
+  - Jitao shi <jitao.shi at mediatek.com>
+
+description: |
+  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-hdmi-ddc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ddc
+
+  mediatek,hdmi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the mt8195 hdmi controller
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmiddc0: i2c {
+      compatible = "mediatek,mt8195-hdmi-ddc";
+      mediatek,hdmi = <&hdmi0>;
+      clocks = <&clk26m>;
+      clock-names = "ddc";
+    };
+
+...

-- 
b4 0.11.0-dev


More information about the dri-devel mailing list