[PATCH v3 1/2] drivers: gpu: drm: add driver for samsung s6e3fc2x01 cmd mode panel

[Bjorn Andersson]

On Sat, Oct 08, 2022 at 03:12:01PM +0200, Nia Espera wrote:
> Adds a dedicated driver for the Samsung s6e3fc2x01 panel used in OnePlus
> 6T smartphones which was previously driven by the sofef00 panel driver
> 
> Signed-off-by: Nia Espera <a5b6 at riseup.net>
> Reviewed-by: Caleb Connolly <caleb at connolly.tech>
> ---
>  MAINTAINERS                                   |   5 +
>  drivers/gpu/drm/panel/Kconfig                 |  12 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../gpu/drm/panel/panel-samsung-s6e3fc2x01.c  | 388 ++++++++++++++++++

git log --oneline drivers/gpu/drm/panel indicates that the $subject
prefix should be "drm/panel:"

[..]
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 6d493b9d64fe..b54de8812e91 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI) += panel-samsung-s6e63m0-dsi.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) += panel-samsung-s6e88a0-ams452ef01.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF00) += panel-samsung-sofef00.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FC2X01) += panel-samsung-s6e3fc2x01.o
>  obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
>  obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
>  obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c b/drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c
[..]
> +static int s6e3fc2x01_panel_bl_update_status(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	int err;
> +	u16 brightness;
> +
> +	brightness = (u16)backlight_get_brightness(bl);
> +	// This panel needs the high and low bytes swapped for the brightness value

/* */ please

> +	brightness = __swab16(brightness);
> +
> +	err = mipi_dsi_dcs_set_display_brightness(dsi, brightness);

This returns a valid <= 0, so it would be nicer with just

	return mipi_dsi_dsc_set_display_brightness(...);

> +	if (err < 0)
> +		return err;
> +
> +	return 0;
> +}
> +
> +static const struct backlight_ops s6e3fc2x01_panel_bl_ops = {
> +	.update_status = s6e3fc2x01_panel_bl_update_status,
> +};
> +

Regards,
Bjorn