[PATCH v1 3/5] arm64: dts: qcom: sm8450-hdk: enable display hardware

[Bjorn Andersson]

On Fri, Nov 04, 2022 at 04:13:56PM +0300, Dmitry Baryshkov wrote:
> Enable MDSS/DPU/DSI0 on SM8450-HDK device. Note, there is no panel
> configuration (yet).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index 38ccd44620d0..e1a4cf1ee51d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -442,3 +442,21 @@ &usb_1_qmpphy {
>  	vdda-phy-supply = <&vreg_l6b_1p2>;
>  	vdda-pll-supply = <&vreg_l1b_0p91>;
>  };
> +
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
> +&dsi0 {

Please prefix the labels with "mdss_" so that you can keep them sorted
alphabetically.

THanks,
Bjorn

> +	status = "okay";
> +	vdda-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&dsi0_phy {
> +	status = "okay";
> +	vdds-supply = <&vreg_l5b_0p88>;
> +};
> -- 
> 2.35.1
>