[PATCH v3 02/12] dt-bindings: display: mediatek: add MT8195 hdmi bindings

Guillaume Ranquet granquet at baylibre.com
Mon Nov 7 14:42:25 UTC 2022


On Mon, 07 Nov 2022 11:02, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>On 04/11/2022 15:09, Guillaume Ranquet wrote:
>> Add mt8195 SoC bindings for hdmi and hdmi-ddc
>>
>> On mt8195 the ddc i2c controller is part of the hdmi IP block and thus has no
>> specific register range, power domain or interrupt, making it simpler
>> than its the legacy "mediatek,hdmi-ddc" binding.
>>
>> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
>> ---
>>  .../bindings/display/mediatek/mediatek,hdmi.yaml   | 61 ++++++++++++++++++----
>>  .../display/mediatek/mediatek,mt8195-hdmi-ddc.yaml | 51 ++++++++++++++++++
>>  2 files changed, 101 insertions(+), 11 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
>> index bdaf0b51e68c..9710b7b6e9bf 100644
>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
>> @@ -21,6 +21,7 @@ properties:
>>        - mediatek,mt7623-hdmi
>>        - mediatek,mt8167-hdmi
>>        - mediatek,mt8173-hdmi
>> +      - mediatek,mt8195-hdmi
>>
>>    reg:
>>      maxItems: 1
>> @@ -29,18 +30,12 @@ properties:
>>      maxItems: 1
>>
>>    clocks:
>> -    items:
>> -      - description: Pixel Clock
>> -      - description: HDMI PLL
>> -      - description: Bit Clock
>> -      - description: S/PDIF Clock
>> +    minItems: 4
>
>Drop minItems, it's not needed when equal to maxItems.
>
>> +    maxItems: 4
>>
>>    clock-names:
>> -    items:
>> -      - const: pixel
>> -      - const: pll
>> -      - const: bclk
>> -      - const: spdif
>> +    minItems: 4
>
>Drop minItems, it's not needed when equal to maxItems.
>
>
>> +    maxItems: 4
>>
>>    phys:
>>      maxItems: 1
>> @@ -58,6 +53,9 @@ properties:
>>      description: |
>>        phandle link and register offset to the system configuration registers.
>>
>> +  power-domains:
>> +    maxItems: 1
>> +
>>    ports:
>>      $ref: /schemas/graph.yaml#/properties/ports
>>
>> @@ -86,9 +84,50 @@ required:
>>    - clock-names
>>    - phys
>>    - phy-names
>> -  - mediatek,syscon-hdmi
>>    - ports
>>
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: mediatek,mt8195-hdmi
>> +    then:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: APB
>> +            - description: HDCP
>> +            - description: HDCP 24M
>> +            - description: Split HDMI
>> +        clock-names:
>> +          items:
>> +            - const: hdmi_apb_sel
>> +            - const: hdcp_sel
>> +            - const: hdcp24_sel
>> +            - const: split_hdmi
>> +
>> +      required:
>> +        - power-domains
>> +    else:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: Pixel Clock
>> +            - description: HDMI PLL
>> +            - description: Bit Clock
>> +            - description: S/PDIF Clock
>> +
>> +        clock-names:
>> +          items:
>> +            - const: pixel
>> +            - const: pll
>> +            - const: bclk
>> +            - const: spdif
>> +
>> +      required:
>> +        - mediatek,syscon-hdmi
>> +
>>  additionalProperties: false
>>
>>  examples:
>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
>> new file mode 100644
>> index 000000000000..2dc273689584
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
>> @@ -0,0 +1,51 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Mediatek HDMI DDC for mt8195
>> +
>> +maintainers:
>> +  - CK Hu <ck.hu at mediatek.com>
>> +  - Jitao shi <jitao.shi at mediatek.com>
>> +
>> +description: |
>> +  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - mediatek,mt8195-hdmi-ddc
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    items:
>> +      - const: ddc
>
>Unless you expect it to grow, I propose to drop clock-names. It's not
>useful when the name is the same as name of hardware.
>
>Best regards,
>Krzysztof
>

Thx for your suggestions, I'll apply them in v4.

Thx,
Guillaume.


More information about the dri-devel mailing list