[PATCH] drm/imx: ipuv3-plane: Fix overlay plane width

Philipp Zabel p.zabel at pengutronix.de
Tue Nov 8 14:14:20 UTC 2022


ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.

drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.

Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/gpu/drm/imx/ipuv3-plane.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index dba4f7d81d69..80142d9a4a55 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -614,6 +614,11 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 		break;
 	}
 
+	if (ipu_plane->dp_flow == IPU_DP_FLOW_SYNC_BG)
+		width = ipu_src_rect_width(new_state);
+	else
+		width = drm_rect_width(&new_state->src) >> 16;
+
 	eba = drm_plane_state_to_eba(new_state, 0);
 
 	/*
@@ -622,8 +627,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 	 */
 	if (ipu_state->use_pre) {
 		axi_id = ipu_chan_assign_axi_id(ipu_plane->dma);
-		ipu_prg_channel_configure(ipu_plane->ipu_ch, axi_id,
-					  ipu_src_rect_width(new_state),
+		ipu_prg_channel_configure(ipu_plane->ipu_ch, axi_id, width,
 					  drm_rect_height(&new_state->src) >> 16,
 					  fb->pitches[0], fb->format->format,
 					  fb->modifier, &eba);
@@ -678,9 +682,8 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 		break;
 	}
 
-	ipu_dmfc_config_wait4eot(ipu_plane->dmfc, ALIGN(drm_rect_width(dst), 8));
+	ipu_dmfc_config_wait4eot(ipu_plane->dmfc, width);
 
-	width = ipu_src_rect_width(new_state);
 	height = drm_rect_height(&new_state->src) >> 16;
 	info = drm_format_info(fb->format->format);
 	ipu_calculate_bursts(width, info->cpp[0], fb->pitches[0],
@@ -744,8 +747,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 		ipu_cpmem_set_burstsize(ipu_plane->ipu_ch, 16);
 
 		ipu_cpmem_zero(ipu_plane->alpha_ch);
-		ipu_cpmem_set_resolution(ipu_plane->alpha_ch,
-					 ipu_src_rect_width(new_state),
+		ipu_cpmem_set_resolution(ipu_plane->alpha_ch, width,
 					 drm_rect_height(&new_state->src) >> 16);
 		ipu_cpmem_set_format_passthrough(ipu_plane->alpha_ch, 8);
 		ipu_cpmem_set_high_priority(ipu_plane->alpha_ch);

base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
-- 
2.30.2



More information about the dri-devel mailing list