[PATCH v2.5] drm/msm/dsi: switch to DRM_PANEL_BRIDGE #forregzbot
Thorsten Leemhuis
regressions at leemhuis.info
Sun Nov 13 10:23:47 UTC 2022
[Note: this mail is primarily send for documentation purposes and/or for
regzbot, my Linux kernel regression tracking bot. That's why I removed
most or all folks from the list of recipients, but left any that looked
like a mailing lists. These mails usually contain '#forregzbot' in the
subject, to make them easy to spot and filter out.]
[TLDR: I'm adding this regression report to the list of tracked
regressions; all text from me you find below is based on a few templates
paragraphs you might have encountered already already in similar form.]
Hi, this is your Linux kernel regression tracker.
On 11.11.22 16:30, Caleb Connolly wrote:
>
> This patch has caused a regression on 6.1-rc for some devices that use
> DSI panels. The new behaviour results in the DSI controller being
> switched off before the panel unprepare hook is called. As a result,
> panel drivers which call mipi_dsi_dcs_write() or similar in unprepare()
> fail.
>
> I've noticed it specifically on the OnePlus 6 (with upstream Samsung
> s0fef00 panel driver) and the SHIFT6mq with an out of tree driver.
Thanks for the report. To be sure below issue doesn't fall through the
cracks unnoticed, I'm adding it to regzbot, my Linux kernel regression
tracking bot:
#regzbot ^introduced 007ac0262b0d
#regzbot title drm: msm: DSI controller being switched off before the
panel unprepare hook is called
#regzbot ignore-activity
This isn't a regression? This issue or a fix for it are already
discussed somewhere else? It was fixed already? You want to clarify when
the regression started to happen? Or point out I got the title or
something else totally wrong? Then just reply -- ideally with also
telling regzbot about it, as explained here:
https://linux-regtracking.leemhuis.info/tracked-regression/
Reminder for developers: When fixing the issue, add 'Link:' tags
pointing to the report (the mail this one replies to), as explained for
in the Linux kernel's documentation; above webpage explains why this is
important for tracked regressions.
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
P.S.: As the Linux kernel's regression tracker I deal with a lot of
reports and sometimes miss something important when writing mails like
this. If that's the case here, don't hesitate to tell me in a public
reply, it's in everyone's interest to set the public record straight.
> On 12/07/2022 14:22, Dmitry Baryshkov wrote:
>> Currently the DSI driver has two separate paths: one if the next device
>> in a chain is a bridge and another one if the panel is connected
>> directly to the DSI host. Simplify the code path by using panel-bridge
>> driver (already selected in Kconfig) and dropping support for
>> handling the panel directly.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>
>> I'm not sending this as a separate patchset (I'd like to sort out mdp5
>> first), but more of a preview of changes related to
>> msm_dsi_manager_ext_bridge_init().
>>
>> ---
>> drivers/gpu/drm/msm/dsi/dsi.c | 35 +---
>> drivers/gpu/drm/msm/dsi/dsi.h | 16 +-
>> drivers/gpu/drm/msm/dsi/dsi_host.c | 25 ---
>> drivers/gpu/drm/msm/dsi/dsi_manager.c | 283 +++-----------------------
>> 4 files changed, 36 insertions(+), 323 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi.c
>> b/drivers/gpu/drm/msm/dsi/dsi.c
>> index 1625328fa430..4edb9167e600 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi.c
>> @@ -6,14 +6,6 @@
>> #include "dsi.h"
>> #include "dsi_cfg.h"
>>
>> -struct drm_encoder *msm_dsi_get_encoder(struct msm_dsi *msm_dsi)
>> -{
>> - if (!msm_dsi || !msm_dsi_device_connected(msm_dsi))
>> - return NULL;
>> -
>> - return msm_dsi->encoder;
>> -}
>> -
>> bool msm_dsi_is_cmd_mode(struct msm_dsi *msm_dsi)
>> {
>> unsigned long host_flags =
>> msm_dsi_host_get_mode_flags(msm_dsi->host);
>> @@ -220,7 +212,6 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
>> struct drm_device *dev,
>> struct drm_encoder *encoder)
>> {
>> struct msm_drm_private *priv;
>> - struct drm_bridge *ext_bridge;
>> int ret;
>>
>> if (WARN_ON(!encoder) || WARN_ON(!msm_dsi) || WARN_ON(!dev))
>> @@ -254,26 +245,10 @@ int msm_dsi_modeset_init(struct msm_dsi
>> *msm_dsi, struct drm_device *dev,
>> goto fail;
>> }
>>
>> - /*
>> - * check if the dsi encoder output is connected to a panel or an
>> - * external bridge. We create a connector only if we're connected
>> to a
>> - * drm_panel device. When we're connected to an external bridge, we
>> - * assume that the drm_bridge driver will create the connector
>> itself.
>> - */
>> - ext_bridge = msm_dsi_host_get_bridge(msm_dsi->host);
>> -
>> - if (ext_bridge)
>> - msm_dsi->connector =
>> - msm_dsi_manager_ext_bridge_init(msm_dsi->id);
>> - else
>> - msm_dsi->connector =
>> - msm_dsi_manager_connector_init(msm_dsi->id);
>> -
>> - if (IS_ERR(msm_dsi->connector)) {
>> - ret = PTR_ERR(msm_dsi->connector);
>> + ret = msm_dsi_manager_ext_bridge_init(msm_dsi->id);
>> + if (ret) {
>> DRM_DEV_ERROR(dev->dev,
>> "failed to create dsi connector: %d\n", ret);
>> - msm_dsi->connector = NULL;
>> goto fail;
>> }
>>
>> @@ -287,12 +262,6 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi,
>> struct drm_device *dev,
>> msm_dsi->bridge = NULL;
>> }
>>
>> - /* don't destroy connector if we didn't make it */
>> - if (msm_dsi->connector && !msm_dsi->external_bridge)
>> - msm_dsi->connector->funcs->destroy(msm_dsi->connector);
>> -
>> - msm_dsi->connector = NULL;
>> -
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h
>> b/drivers/gpu/drm/msm/dsi/dsi.h
>> index 580a1e6358bf..703e4c88d7fb 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi.h
>> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
>> @@ -12,7 +12,6 @@
>> #include <drm/drm_bridge.h>
>> #include <drm/drm_crtc.h>
>> #include <drm/drm_mipi_dsi.h>
>> -#include <drm/drm_panel.h>
>>
>> #include "msm_drv.h"
>> #include "disp/msm_disp_snapshot.h"
>> @@ -49,8 +48,6 @@ struct msm_dsi {
>> struct drm_device *dev;
>> struct platform_device *pdev;
>>
>> - /* connector managed by us when we're connected to a drm_panel */
>> - struct drm_connector *connector;
>> /* internal dsi bridge attached to MDP interface */
>> struct drm_bridge *bridge;
>>
>> @@ -58,10 +55,8 @@ struct msm_dsi {
>> struct msm_dsi_phy *phy;
>>
>> /*
>> - * panel/external_bridge connected to dsi bridge output, only one
>> of the
>> - * two can be valid at a time
>> + * external_bridge connected to dsi bridge output
>> */
>> - struct drm_panel *panel;
>> struct drm_bridge *external_bridge;
>>
>> struct device *phy_dev;
>> @@ -76,8 +71,7 @@ struct msm_dsi {
>> /* dsi manager */
>> struct drm_bridge *msm_dsi_manager_bridge_init(u8 id);
>> void msm_dsi_manager_bridge_destroy(struct drm_bridge *bridge);
>> -struct drm_connector *msm_dsi_manager_connector_init(u8 id);
>> -struct drm_connector *msm_dsi_manager_ext_bridge_init(u8 id);
>> +int msm_dsi_manager_ext_bridge_init(u8 id);
>> int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg);
>> bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 dma_base, u32 len);
>> int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
>> @@ -87,11 +81,9 @@ void msm_dsi_manager_tpg_enable(void);
>> /* msm dsi */
>> static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi)
>> {
>> - return msm_dsi->panel || msm_dsi->external_bridge;
>> + return msm_dsi->external_bridge;
>> }
>>
>> -struct drm_encoder *msm_dsi_get_encoder(struct msm_dsi *msm_dsi);
>> -
>> /* dsi host */
>> struct msm_dsi_host;
>> int msm_dsi_host_xfer_prepare(struct mipi_dsi_host *host,
>> @@ -116,9 +108,7 @@ int msm_dsi_host_set_display_mode(struct
>> mipi_dsi_host *host,
>> const struct drm_display_mode *mode);
>> enum drm_mode_status msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
>> const struct drm_display_mode *mode);
>> -struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host);
>> unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
>> -struct drm_bridge *msm_dsi_host_get_bridge(struct mipi_dsi_host *host);
>> int msm_dsi_host_register(struct mipi_dsi_host *host);
>> void msm_dsi_host_unregister(struct mipi_dsi_host *host);
>> void msm_dsi_host_set_phy_mode(struct mipi_dsi_host *host,
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index fb5ab6c718c8..5a18aa710d00 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -164,7 +164,6 @@ struct msm_dsi_host {
>> struct msm_display_dsc_config *dsc;
>>
>> /* connected device info */
>> - struct device_node *device_node;
>> unsigned int channel;
>> unsigned int lanes;
>> enum mipi_dsi_pixel_format format;
>> @@ -1721,8 +1720,6 @@ static int dsi_host_detach(struct mipi_dsi_host
>> *host,
>>
>> dsi_dev_detach(msm_host->pdev);
>>
>> - msm_host->device_node = NULL;
>> -
>> DBG("id=%d", msm_host->id);
>> if (msm_host->dev)
>> queue_work(msm_host->workqueue, &msm_host->hpd_work);
>> @@ -1988,16 +1985,6 @@ static int dsi_host_parse_dt(struct
>> msm_dsi_host *msm_host)
>> goto err;
>> }
>>
>> - /* Get panel node from the output port's endpoint data */
>> - device_node = of_graph_get_remote_node(np, 1, 0);
>> - if (!device_node) {
>> - DRM_DEV_DEBUG(dev, "%s: no valid device\n", __func__);
>> - ret = -ENODEV;
>> - goto err;
>> - }
>> -
>> - msm_host->device_node = device_node;
>> -
>> if (of_property_read_bool(np, "syscon-sfpb")) {
>> msm_host->sfpb = syscon_regmap_lookup_by_phandle(np,
>> "syscon-sfpb");
>> @@ -2678,23 +2665,11 @@ enum drm_mode_status
>> msm_dsi_host_check_dsc(struct mipi_dsi_host *host,
>> return MODE_OK;
>> }
>>
>> -struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host)
>> -{
>> - return of_drm_find_panel(to_msm_dsi_host(host)->device_node);
>> -}
>> -
>> unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host)
>> {
>> return to_msm_dsi_host(host)->mode_flags;
>> }
>>
>> -struct drm_bridge *msm_dsi_host_get_bridge(struct mipi_dsi_host *host)
>> -{
>> - struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>> -
>> - return of_drm_find_bridge(msm_host->device_node);
>> -}
>> -
>> void msm_dsi_host_snapshot(struct msm_disp_state *disp_state, struct
>> mipi_dsi_host *host)
>> {
>> struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> b/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> index cb84d185d73a..546e0b873558 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
>> @@ -214,39 +214,26 @@ static void dsi_mgr_phy_disable(int id)
>> }
>> }
>>
>> -struct dsi_connector {
>> - struct drm_connector base;
>> - int id;
>> -};
>> -
>> struct dsi_bridge {
>> struct drm_bridge base;
>> int id;
>> };
>>
>> -#define to_dsi_connector(x) container_of(x, struct dsi_connector, base)
>> #define to_dsi_bridge(x) container_of(x, struct dsi_bridge, base)
>>
>> -static inline int dsi_mgr_connector_get_id(struct drm_connector
>> *connector)
>> -{
>> - struct dsi_connector *dsi_connector = to_dsi_connector(connector);
>> - return dsi_connector->id;
>> -}
>> -
>> static int dsi_mgr_bridge_get_id(struct drm_bridge *bridge)
>> {
>> struct dsi_bridge *dsi_bridge = to_dsi_bridge(bridge);
>> return dsi_bridge->id;
>> }
>>
>> -static int msm_dsi_manager_panel_init(struct drm_connector *conn, u8 id)
>> +static void msm_dsi_manager_set_split_display(u8 id)
>> {
>> - struct msm_drm_private *priv = conn->dev->dev_private;
>> - struct msm_kms *kms = priv->kms;
>> struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
>> + struct msm_drm_private *priv = msm_dsi->dev->dev_private;
>> + struct msm_kms *kms = priv->kms;
>> struct msm_dsi *master_dsi, *slave_dsi;
>> - struct drm_panel *panel;
>>
>> if (IS_BONDED_DSI() && !IS_MASTER_DSI_LINK(id)) {
>> master_dsi = other_dsi;
>> @@ -256,89 +243,18 @@ static int msm_dsi_manager_panel_init(struct
>> drm_connector *conn, u8 id)
>> slave_dsi = other_dsi;
>> }
>>
>> - /*
>> - * There is only 1 panel in the global panel list for bonded DSI
>> mode.
>> - * Therefore slave dsi should get the drm_panel instance from master
>> - * dsi.
>> - */
>> - panel = msm_dsi_host_get_panel(master_dsi->host);
>> - if (IS_ERR(panel)) {
>> - DRM_ERROR("Could not find panel for %u (%ld)\n", msm_dsi->id,
>> - PTR_ERR(panel));
>> - return PTR_ERR(panel);
>> - }
>> -
>> - if (!panel || !IS_BONDED_DSI())
>> - goto out;
>> -
>> - drm_object_attach_property(&conn->base,
>> - conn->dev->mode_config.tile_property, 0);
>> + if (!msm_dsi->external_bridge || !IS_BONDED_DSI())
>> + return;
>>
>> /*
>> * Set split display info to kms once bonded DSI panel is
>> connected to
>> * both hosts.
>> */
>> - if (other_dsi && other_dsi->panel &&
>> kms->funcs->set_split_display) {
>> + if (other_dsi && other_dsi->external_bridge &&
>> kms->funcs->set_split_display) {
>> kms->funcs->set_split_display(kms, master_dsi->encoder,
>> slave_dsi->encoder,
>> msm_dsi_is_cmd_mode(msm_dsi));
>> }
>> -
>> -out:
>> - msm_dsi->panel = panel;
>> - return 0;
>> -}
>> -
>> -static enum drm_connector_status dsi_mgr_connector_detect(
>> - struct drm_connector *connector, bool force)
>> -{
>> - int id = dsi_mgr_connector_get_id(connector);
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> -
>> - return msm_dsi->panel ? connector_status_connected :
>> - connector_status_disconnected;
>> -}
>> -
>> -static void dsi_mgr_connector_destroy(struct drm_connector *connector)
>> -{
>> - struct dsi_connector *dsi_connector = to_dsi_connector(connector);
>> -
>> - DBG("");
>> -
>> - drm_connector_cleanup(connector);
>> -
>> - kfree(dsi_connector);
>> -}
>> -
>> -static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
>> -{
>> - int id = dsi_mgr_connector_get_id(connector);
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> - struct drm_panel *panel = msm_dsi->panel;
>> - int num;
>> -
>> - if (!panel)
>> - return 0;
>> -
>> - /*
>> - * In bonded DSI mode, we have one connector that can be
>> - * attached to the drm_panel.
>> - */
>> - num = drm_panel_get_modes(panel, connector);
>> - if (!num)
>> - return 0;
>> -
>> - return num;
>> -}
>> -
>> -static struct drm_encoder *
>> -dsi_mgr_connector_best_encoder(struct drm_connector *connector)
>> -{
>> - int id = dsi_mgr_connector_get_id(connector);
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> -
>> - DBG("");
>> - return msm_dsi_get_encoder(msm_dsi);
>> }
>>
>> static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
>> @@ -403,7 +319,6 @@ static void dsi_mgr_bridge_pre_enable(struct
>> drm_bridge *bridge)
>> struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
>> struct mipi_dsi_host *host = msm_dsi->host;
>> - struct drm_panel *panel = msm_dsi->panel;
>> bool is_bonded_dsi = IS_BONDED_DSI();
>> int ret;
>>
>> @@ -418,18 +333,6 @@ static void dsi_mgr_bridge_pre_enable(struct
>> drm_bridge *bridge)
>> if (!dsi_mgr_power_on_early(bridge))
>> dsi_mgr_bridge_power_on(bridge);
>>
>> - /* Always call panel functions once, because even for dual panels,
>> - * there is only one drm_panel instance.
>> - */
>> - if (panel) {
>> - ret = drm_panel_prepare(panel);
>> - if (ret) {
>> - pr_err("%s: prepare panel %d failed, %d\n", __func__,
>> - id, ret);
>> - goto panel_prep_fail;
>> - }
>> - }
>> -
>> ret = msm_dsi_host_enable(host);
>> if (ret) {
>> pr_err("%s: enable host %d failed, %d\n", __func__, id, ret);
>> @@ -449,9 +352,6 @@ static void dsi_mgr_bridge_pre_enable(struct
>> drm_bridge *bridge)
>> host1_en_fail:
>> msm_dsi_host_disable(host);
>> host_en_fail:
>> - if (panel)
>> - drm_panel_unprepare(panel);
>> -panel_prep_fail:
>>
>> return;
>> }
>> @@ -469,62 +369,12 @@ void msm_dsi_manager_tpg_enable(void)
>> }
>> }
>>
>> -static void dsi_mgr_bridge_enable(struct drm_bridge *bridge)
>> -{
>> - int id = dsi_mgr_bridge_get_id(bridge);
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> - struct drm_panel *panel = msm_dsi->panel;
>> - bool is_bonded_dsi = IS_BONDED_DSI();
>> - int ret;
>> -
>> - DBG("id=%d", id);
>> - if (!msm_dsi_device_connected(msm_dsi))
>> - return;
>> -
>> - /* Do nothing with the host if it is slave-DSI in case of bonded
>> DSI */
>> - if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id))
>> - return;
>> -
>> - if (panel) {
>> - ret = drm_panel_enable(panel);
>> - if (ret) {
>> - pr_err("%s: enable panel %d failed, %d\n", __func__, id,
>> - ret);
>> - }
>> - }
>> -}
>> -
>> -static void dsi_mgr_bridge_disable(struct drm_bridge *bridge)
>> -{
>> - int id = dsi_mgr_bridge_get_id(bridge);
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> - struct drm_panel *panel = msm_dsi->panel;
>> - bool is_bonded_dsi = IS_BONDED_DSI();
>> - int ret;
>> -
>> - DBG("id=%d", id);
>> - if (!msm_dsi_device_connected(msm_dsi))
>> - return;
>> -
>> - /* Do nothing with the host if it is slave-DSI in case of bonded
>> DSI */
>> - if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id))
>> - return;
>> -
>> - if (panel) {
>> - ret = drm_panel_disable(panel);
>> - if (ret)
>> - pr_err("%s: Panel %d OFF failed, %d\n", __func__, id,
>> - ret);
>> - }
>> -}
>> -
>> static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)
>> {
>> int id = dsi_mgr_bridge_get_id(bridge);
>> struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
>> struct mipi_dsi_host *host = msm_dsi->host;
>> - struct drm_panel *panel = msm_dsi->panel;
>> bool is_bonded_dsi = IS_BONDED_DSI();
>> int ret;
>>
>> @@ -551,13 +401,6 @@ static void dsi_mgr_bridge_post_disable(struct
>> drm_bridge *bridge)
>> pr_err("%s: host1 disable failed, %d\n", __func__, ret);
>> }
>>
>> - if (panel) {
>> - ret = drm_panel_unprepare(panel);
>> - if (ret)
>> - pr_err("%s: Panel %d unprepare failed,%d\n", __func__,
>> - id, ret);
>> - }
>> -
>> msm_dsi_host_disable_irq(host);
>> if (is_bonded_dsi && msm_dsi1)
>> msm_dsi_host_disable_irq(msm_dsi1->host);
>> @@ -614,76 +457,13 @@ static enum drm_mode_status
>> dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
>> return msm_dsi_host_check_dsc(host, mode);
>> }
>>
>> -static const struct drm_connector_funcs dsi_mgr_connector_funcs = {
>> - .detect = dsi_mgr_connector_detect,
>> - .fill_modes = drm_helper_probe_single_connector_modes,
>> - .destroy = dsi_mgr_connector_destroy,
>> - .reset = drm_atomic_helper_connector_reset,
>> - .atomic_duplicate_state =
>> drm_atomic_helper_connector_duplicate_state,
>> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> -};
>> -
>> -static const struct drm_connector_helper_funcs
>> dsi_mgr_conn_helper_funcs = {
>> - .get_modes = dsi_mgr_connector_get_modes,
>> - .best_encoder = dsi_mgr_connector_best_encoder,
>> -};
>> -
>> static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = {
>> .pre_enable = dsi_mgr_bridge_pre_enable,
>> - .enable = dsi_mgr_bridge_enable,
>> - .disable = dsi_mgr_bridge_disable,
>> .post_disable = dsi_mgr_bridge_post_disable,
>> .mode_set = dsi_mgr_bridge_mode_set,
>> .mode_valid = dsi_mgr_bridge_mode_valid,
>> };
>>
>> -/* initialize connector when we're connected to a drm_panel */
>> -struct drm_connector *msm_dsi_manager_connector_init(u8 id)
>> -{
>> - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> - struct drm_connector *connector = NULL;
>> - struct dsi_connector *dsi_connector;
>> - int ret;
>> -
>> - dsi_connector = kzalloc(sizeof(*dsi_connector), GFP_KERNEL);
>> - if (!dsi_connector)
>> - return ERR_PTR(-ENOMEM);
>> -
>> - dsi_connector->id = id;
>> -
>> - connector = &dsi_connector->base;
>> -
>> - ret = drm_connector_init(msm_dsi->dev, connector,
>> - &dsi_mgr_connector_funcs, DRM_MODE_CONNECTOR_DSI);
>> - if (ret)
>> - return ERR_PTR(ret);
>> -
>> - drm_connector_helper_add(connector, &dsi_mgr_conn_helper_funcs);
>> -
>> - /* Enable HPD to let hpd event is handled
>> - * when panel is attached to the host.
>> - */
>> - connector->polled = DRM_CONNECTOR_POLL_HPD;
>> -
>> - /* Display driver doesn't support interlace now. */
>> - connector->interlace_allowed = 0;
>> - connector->doublescan_allowed = 0;
>> -
>> - drm_connector_attach_encoder(connector, msm_dsi->encoder);
>> -
>> - ret = msm_dsi_manager_panel_init(connector, id);
>> - if (ret) {
>> - DRM_DEV_ERROR(msm_dsi->dev->dev, "init panel failed %d\n", ret);
>> - goto fail;
>> - }
>> -
>> - return connector;
>> -
>> -fail:
>> - connector->funcs->destroy(connector);
>> - return ERR_PTR(ret);
>> -}
>> -
>> /* initialize bridge */
>> struct drm_bridge *msm_dsi_manager_bridge_init(u8 id)
>> {
>> @@ -722,18 +502,21 @@ struct drm_bridge
>> *msm_dsi_manager_bridge_init(u8 id)
>> return ERR_PTR(ret);
>> }
>>
>> -struct drm_connector *msm_dsi_manager_ext_bridge_init(u8 id)
>> +int msm_dsi_manager_ext_bridge_init(u8 id)
>> {
>> struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
>> struct drm_device *dev = msm_dsi->dev;
>> - struct drm_connector *connector;
>> struct drm_encoder *encoder;
>> struct drm_bridge *int_bridge, *ext_bridge;
>> int ret;
>>
>> int_bridge = msm_dsi->bridge;
>> - ext_bridge = msm_dsi->external_bridge =
>> - msm_dsi_host_get_bridge(msm_dsi->host);
>> + ext_bridge = devm_drm_of_get_bridge(&msm_dsi->pdev->dev,
>> + msm_dsi->pdev->dev.of_node, 1, 0);
>> + if (IS_ERR(ext_bridge))
>> + return PTR_ERR(ext_bridge);
>> +
>> + msm_dsi->external_bridge = ext_bridge;
>>
>> encoder = msm_dsi->encoder;
>>
>> @@ -745,36 +528,32 @@ struct drm_connector
>> *msm_dsi_manager_ext_bridge_init(u8 id)
>> ret = drm_bridge_attach(encoder, ext_bridge, int_bridge,
>> DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>> if (ret == -EINVAL) {
>> - struct drm_connector *connector;
>> - struct list_head *connector_list;
>> -
>> - /* link the internal dsi bridge to the external bridge */
>> - drm_bridge_attach(encoder, ext_bridge, int_bridge, 0);
>> -
>> /*
>> - * we need the drm_connector created by the external bridge
>> - * driver (or someone else) to feed it to our driver's
>> - * priv->connector[] list, mainly for msm_fbdev_init()
>> + * link the internal dsi bridge to the external bridge,
>> + * connector is created by the next bridge.
>> */
>> - connector_list = &dev->mode_config.connector_list;
>> + ret = drm_bridge_attach(encoder, ext_bridge, int_bridge, 0);
>> + if (ret < 0)
>> + return ret;
>> + } else {
>> + struct drm_connector *connector;
>>
>> - list_for_each_entry(connector, connector_list, head) {
>> - if (drm_connector_has_possible_encoder(connector, encoder))
>> - return connector;
>> + /* We are in charge of the connector, create one now. */
>> + connector = drm_bridge_connector_init(dev, encoder);
>> + if (IS_ERR(connector)) {
>> + DRM_ERROR("Unable to create bridge connector\n");
>> + return PTR_ERR(connector);
>> }
>>
>> - return ERR_PTR(-ENODEV);
>> - }
>> -
>> - connector = drm_bridge_connector_init(dev, encoder);
>> - if (IS_ERR(connector)) {
>> - DRM_ERROR("Unable to create bridge connector\n");
>> - return ERR_CAST(connector);
>> + ret = drm_connector_attach_encoder(connector, encoder);
>> + if (ret < 0)
>> + return ret;
>> }
>>
>> - drm_connector_attach_encoder(connector, encoder);
>> + /* The pipeline is ready, ping encoders if necessary */
>> + msm_dsi_manager_set_split_display(id);
>>
>> - return connector;
>> + return 0;
>> }
>>
>> void msm_dsi_manager_bridge_destroy(struct drm_bridge *bridge)
>> --
>> 2.35.1
>>
>
More information about the dri-devel
mailing list