[PATCH v2 00/12] Enable Display for SM8350

[Konrad Dybcio]

On 15/11/2022 12:17, Robert Foss wrote:
> Dependencies:
> https://lore.kernel.org/all/20221102231309.583587-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221024164225.3236654-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221104130324.1024242-5-dmitry.baryshkov@linaro.org/
> 
Looks like only patches 0-3 reached linux-arm-msm and freedreno lists?

Konrad
> Branch:
> https://git.linaro.org/people/robert.foss/linux.git/log/?h=sm8350_dsi_v2
> 
> This series implements display support for SM8350 and
> enables HDMI output for the SM8350-HDK platform.
> 
> Changes from v1:
>   - Added R-b tags from v1
>   - Added qcom,sm8350-dpu binding patch
>   - Added qcom,sm8350-mdss binding patch
>   - Corrected sm8350.dtsi according to new dpu/mdss bindings
>   - Bjorn: Removed regulator-always-on property from lt9611_1v2 regulator
>   - Bjorn: Moved lt9611 pinctl pins into a common node
>   - Bjorn/Krzysztof: Moved status property to last in node
>   - Krzysztof: Changed hdmi-out to hdmi-connector
>   - Krzysztof: Fixed regulator node name
>   - Krzysztof: Changed &mdss to status=disabled as default
>   - Krzysztof: Changed &mdss_mdp node name to display-controller
>   - Krzysztof: Fixed opp-table node name
>   - Krzysztof: Fixed phy node name
>   - Dmitry: Split commit containing dpu & mdss compatibles string
>   - Dmitry: Added msm_mdss_enable case
>   - Dmitry: Fixed dpu ctl features
>   
> 
> Robert Foss (12):
>    dt-bindings: display: msm: Add qcom,sm8350-dpu binding
>    dt-bindings: display: msm: Add qcom,sm8350-mdss binding
>    drm/msm/dpu: Refactor sc7280_pp location
>    drm/msm/dpu: Add SM8350 to hw catalog
>    drm/msm/dpu: Add support for SM8350
>    drm/msm: Add support for SM8350
>    arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
>    arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
>    arm64: dts: qcom: sm8350: Use 2 interconnect cells
>    arm64: dts: qcom: sm8350: Add display system nodes
>    arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
>    arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge
> 
>   .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 +++++++
>   .../display/msm/qcom,sm8350-mdss.yaml         | 240 +++++++++++++
>   arch/arm64/boot/dts/qcom/sm8350-hdk.dts       | 332 ++++++++++++++++++
>   arch/arm64/boot/dts/qcom/sm8350.dtsi          | 226 +++++++++++-
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 210 ++++++++++-
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>   drivers/gpu/drm/msm/msm_mdss.c                |   4 +
>   8 files changed, 1108 insertions(+), 26 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
>   create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
>