[PATCH v2 01/12] dt-bindings: display: msm: Add qcom, sm8350-dpu binding

[Rob Herring]

On Tue, 15 Nov 2022 12:17:10 +0100, Robert Foss wrote:
> Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for DPU device
> tree bindings
> 
> Signed-off-by: Robert Foss <robert.foss at linaro.org>
> ---
>  .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 ++++++++++++++++++
>  1 file changed, 120 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/display/msm/dpu-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.example.dtb: display-controller at ae01000: False schema does not allow {'compatible': ['qcom,sm8350-dpu'], 'reg': [[182456320, 585728], [183173120, 8200]], 'reg-names': ['mdp', 'vbif'], 'clocks': [[4294967295, 27], [4294967295, 28], [4294967295, 0], [4294967295, 34], [4294967295, 32], [4294967295, 44]], 'clock-names': ['bus', 'nrt_bus', 'iface', 'lut', 'core', 'vsync'], 'assigned-clocks': [[4294967295, 44]], 'assigned-clock-rates': [[19200000]], 'operating-points-v2': [[1]], 'power-domains': [[4294967295, 6]], 'interrupts': [[0]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port at 0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]]}}}, 'opp-table': {'compatible': ['operating-points-v2'], 'phandle': [[1]], 'opp-200000000': {'opp-hz': [[0], [200000000]], 'required-opps': [[4294967295]]}, 'opp-300000000': {'opp-hz': [[0], [300000000]], 'required-opps': [[4294967295]]}, 'opp-345000000': {'opp-hz': [[0], [345000000]], 'required-opps': [[4294967295]]}, 'opp-460000000': {'opp-hz': [[0], [460000000]], 'required-opps': [[4294967295]]}}, '$nodename': ['display-controller at ae01000']}
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.example.dtb: display-controller at ae01000: Unevaluated properties are not allowed ('interrupts', 'operating-points-v2', 'opp-table', 'ports', 'power-domains' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.