[PATCH v1 2/8] dt-bindings: display: bridge: renesas, dsi-csi2-tx: Add r8a779g0

[Kieran Bingham]

Quoting Tomi Valkeinen (2022-11-17 12:25:41)
> From: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
> 
> Extend the Renesas DSI display bindings to support the r8a779g0 V4H.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
> ---
>  .../bindings/display/bridge/renesas,dsi-csi2-tx.yaml           | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
> index afeeb967393d..bc3101f77e5a 100644
> --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
> @@ -11,13 +11,14 @@ maintainers:
>  
>  description: |
>    This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
> -  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
> +  R-Car V3U/V4H SoC. The encoder can operate in either DSI or CSI-2 mode, with up

That's 81 chars I think ... so perhaps the 'up' should go 'down' a line
... but hey it's one char, I don't care too much, but I can't resist an
up/down reference :D

Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>

>    to four data lanes.
>  
>  properties:
>    compatible:
>      enum:
>        - renesas,r8a779a0-dsi-csi2-tx    # for V3U
> +      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
>  
>    reg:
>      maxItems: 1
> -- 
> 2.34.1
>