[PATCH 1/2] dt-bindings: display/msm: add support for the display
Rob Herring
robh at kernel.org
Sun Nov 20 15:41:07 UTC 2022
On Sun, Nov 20, 2022 at 02:37:36PM +0100, Adam Skladowski wrote:
> Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
> SM6115 platform.
> Configuration for DSI/PHY is shared with QCM2290 so compatibles are reused.
> Lack of dsi phy supply in example is intended
> due to fact on qcm2290, sm6115 and sm6125
> this phy is supplied via power domain, not regulator.
The subject needs 'sm6115' somewhere.
>
> Signed-off-by: Adam Skladowski <a39.skl at gmail.com>
> ---
> .../bindings/display/msm/qcom,sm6115-dpu.yaml | 87 ++++++++
> .../display/msm/qcom,sm6115-mdss.yaml | 187 ++++++++++++++++++
> 2 files changed, 274 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> new file mode 100644
> index 000000000000..cc77675ec4f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DPU dt properties for SM6115 target
> +
> +maintainers:
> + - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> +
> +$ref: /schemas/display/msm/dpu-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,sm6115-dpu
> +
> + reg:
> + items:
> + - description: Address offset and size for mdp register set
> + - description: Address offset and size for vbif register set
Drop 'Address offset and size for'.
s/mdp/MDP/ ?
s/vbif/VBIF/ ?
> +
> + reg-names:
> + items:
> + - const: mdp
> + - const: vbif
> +
> + clocks:
> + items:
> + - description: Display AXI clock from gcc
> + - description: Display AHB clock from dispcc
> + - description: Display core clock from dispcc
> + - description: Display lut clock from dispcc
> + - description: Display rotator clock from dispcc
> + - description: Display vsync clock from dispcc
Source of the clock is outside the scope of the binding.
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: iface
> + - const: core
> + - const: lut
> + - const: rot
> + - const: vsync
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
> + #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + display-controller at 5e01000 {
> + compatible = "qcom,sm6115-dpu";
> + reg = <0x05e01000 0x8f000>,
> + <0x05eb0000 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmpd SM6115_VDDCX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> new file mode 100644
> index 000000000000..af721aa05b22
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
> @@ -0,0 +1,187 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM6115 Display MDSS
> +
> +maintainers:
> + - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> +
> +description:
> + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
> + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
> + are mentioned for SM6115 target.
> +
> +$ref: /schemas/display/msm/mdss-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,sm6115-mdss
> +
> + clocks:
> + items:
> + - description: Display AHB clock from gcc
> + - description: Display AXI clock
> + - description: Display core clock
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: core
> +
> + iommus:
> + maxItems: 2
> +
> +patternProperties:
> + "^display-controller@[0-9a-f]+$":
> + type: object
> + properties:
> + compatible:
> + const: qcom,sm6115-dpu
> +
> + "^dsi@[0-9a-f]+$":
> + type: object
> + properties:
> + compatible:
> + const: qcom,dsi-ctrl-6g-qcm2290
> +
> + "^phy@[0-9a-f]+$":
> + type: object
> + properties:
> + compatible:
> + const: qcom,dsi-phy-14nm-2290
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
> + #include <dt-bindings/clock/qcom,gcc-sm6115.h>
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + mdss at 5e00000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "qcom,sm6115-mdss";
> + reg = <0x05e00000 0x1000>;
> + reg-names = "mdss";
> + power-domains = <&dispcc MDSS_GDSC>;
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "bus", "core";
> +
> + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu 0x420 0x2>,
> + <&apps_smmu 0x421 0x0>;
> + ranges;
> +
> + display-controller at 5e01000 {
> + compatible = "qcom,sm6115-dpu";
> + reg = <0x05e01000 0x8f000>,
> + <0x05eb0000 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmpd SM6115_VDDCX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + };
> + };
> +
> + dsi at 5e94000 {
> + compatible = "qcom,dsi-ctrl-6g-qcm2290";
> + reg = <0x05e94000 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> +
> + operating-points-v2 = <&dsi_opp_table>;
> + power-domains = <&rpmpd SM6115_VDDCX>;
> + phys = <&dsi0_phy>;
> + phy-names = "dsi";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&dpu_intf1_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + dsi0_phy: phy at 5e94400 {
> + compatible = "qcom,dsi-phy-14nm-2290";
> + reg = <0x05e94400 0x100>,
> + <0x05e94500 0x300>,
> + <0x05e94800 0x188>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "iface", "ref";
> + };
> + };
> +...
> --
> 2.25.1
>
>
More information about the dri-devel
mailing list