[PATCH v2 3/5] arm64: dts: qcom: sm8450-hdk: enable display hardware

[Konrad Dybcio]

On 23.11.2022 00:36, Dmitry Baryshkov wrote:
> Enable MDSS/DPU/DSI0 on SM8450-HDK device. Note, there is no panel
> configuration (yet).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index 2dd4f8c8f931..75b7aecb7d8e 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -349,6 +349,28 @@ vreg_l7e_2p8: ldo7 {
>  	};
>  };
>  
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_dsi0 {
> +	vdda-supply = <&vreg_l6b_1p2>;
> +	status = "okay";
> +};
> +
> +&mdss_dsi0_phy {
> +	vdds-supply = <&vreg_l5b_0p88>;
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
>  &pcie0 {
>  	status = "okay";
>  	max-link-speed = <2>;