[PATCH 2/3] ASoC: hdmi-codec: Add event handler for hdmi TX

Robert Foss robert.foss at linaro.org
Tue Nov 29 17:03:26 UTC 2022


On Thu, 24 Nov 2022 at 09:54, Jiaxin Yu <jiaxin.yu at mediatek.com> wrote:
>
> If the speaker and hdmi are connect to the same port of I2S,
> when try to switch to speaker playback, we will find that hdmi
> is always turned on automatically. The way of switching is
> through SOC_DAPM_PIN_SWITCH, however, such events can not be
> handled in hdmi-codec driver.
>
> So add event handler for hdmi TX to solve the above issue.
>
> Signed-off-by: Jiaxin Yu <jiaxin.yu at mediatek.com>
> ---
>  include/sound/hdmi-codec.h    |  6 ++++++
>  sound/soc/codecs/hdmi-codec.c | 37 +++++++++++++++++++++++++++++++----
>  2 files changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
> index 48ad33aba393..dcbc09254144 100644
> --- a/include/sound/hdmi-codec.h
> +++ b/include/sound/hdmi-codec.h
> @@ -81,6 +81,12 @@ struct hdmi_codec_ops {
>                        struct hdmi_codec_daifmt *fmt,
>                        struct hdmi_codec_params *hparms);
>
> +       /*
> +        * PCM trigger callback.
> +        * Mandatory
> +        */
> +       int (*trigger)(struct device *dev, int cmd);
> +
>         /*
>          * Shuts down the audio stream.
>          * Mandatory
> diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
> index 0b1cdb2d6049..cb4479372e09 100644
> --- a/sound/soc/codecs/hdmi-codec.c
> +++ b/sound/soc/codecs/hdmi-codec.c
> @@ -276,7 +276,31 @@ struct hdmi_codec_priv {
>         u8 iec_status[AES_IEC958_STATUS_SIZE];
>  };
>
> +static int hdmi_tx_event(struct snd_soc_dapm_widget *w,
> +               struct snd_kcontrol *kcontrol, int event)

checkpatch --strict caught this alignment issue.

ASoC: hdmi-codec: Add event handler for hdmi TX
-:44: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#44: FILE: sound/soc/codecs/hdmi-codec.c:280:
+static int hdmi_tx_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *kcontrol, int event)



> +{
> +       struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> +       struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
> +
> +       switch (event) {
> +       case SND_SOC_DAPM_PRE_PMU:
> +               if (hcp->hcd.ops->trigger)
> +                       hcp->hcd.ops->trigger(component->dev->parent, SNDRV_PCM_TRIGGER_START);
> +               break;
> +       case SND_SOC_DAPM_POST_PMD:
> +               if (hcp->hcd.ops->trigger)
> +                       hcp->hcd.ops->trigger(component->dev->parent, SNDRV_PCM_TRIGGER_STOP);
> +               break;
> +       default:
> +               break;
> +       }
> +
> +       return 0;
> +}
> +
>  static const struct snd_soc_dapm_widget hdmi_widgets[] = {
> +       SND_SOC_DAPM_OUT_DRV_E("SDB", SND_SOC_NOPM, 0, 0, NULL, 0, hdmi_tx_event,
> +                              SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_PRE_PMU),
>         SND_SOC_DAPM_OUTPUT("TX"),
>         SND_SOC_DAPM_OUTPUT("RX"),
>  };
> @@ -808,18 +832,23 @@ static int hdmi_dai_probe(struct snd_soc_dai *dai)
>         struct hdmi_codec_daifmt *daifmt;
>         struct snd_soc_dapm_route route[] = {
>                 {
> -                       .sink = "TX",
> +                       .sink = dai->driver->capture.stream_name,
> +                       .source = "RX",
> +               },
> +               {
> +                       .sink = "SDB",
>                         .source = dai->driver->playback.stream_name,
>                 },
>                 {
> -                       .sink = dai->driver->capture.stream_name,
> -                       .source = "RX",
> +                       .sink = "TX",
> +                       .source = "SDB",
>                 },
> +
>         };
>         int ret;
>
>         dapm = snd_soc_component_get_dapm(dai->component);
> -       ret = snd_soc_dapm_add_routes(dapm, route, 2);
> +       ret = snd_soc_dapm_add_routes(dapm, route, ARRAY_SIZE(route));
>         if (ret)
>                 return ret;
>
> --
> 2.18.0
>


More information about the dri-devel mailing list