[PATCH v2 1/3] ASoC: hdmi-codec: Add event handler for hdmi TX

[Mark Brown]

On Mon, Nov 28, 2022 at 03:07:22PM +0000, Jiaxin Yu (俞家鑫) wrote:
> On Fri, 2022-11-25 at 12:18 +0000, Mark Brown wrote:
> > On Fri, Nov 25, 2022 at 05:44:11PM +0800, Jiaxin Yu wrote:

> > I'm a little unclear why this is being implemented as a DAPM
> > operation
> > rather than having the driver forward the PCM trigger op if it's
> > needed?
> > Or alternatively if a DAPM callback is needed why not provide one
> > directly rather than hooking into the trigger function - that's going
> > to
> > be called out of sequence with the rest of DAPM and be potentially
> > confusing given the very different environments that trigger and DAPM
> > operations run in.  A quick glance at the it6505 driver suggests it'd
> > be
> > happier with a DAPM callback.

> Let me describe the hardware connection about mt8186 with it6505(hdmi)
> and rt1015p(speakers).

>                        ==>it6505 
>                      = 
> DL1(FE) ==>I2S3(BE) =
>                      =
>                        ==>rt1015p

> They shared the same one i2s port, but we'd like to control them
> separately. So if hdmi-codec use the PCM trigger op, whne we turn on
> the speaker, hdmi-codec's PCM trigger op is also executed, resulting in
> sound on both devices.
> Is there another way to control them separately? Thank you.

If you just need power control for one or both devices then the machine
driver can add a _PIN_SWITCH() on the output of the device, that'll
cause DAPM to keep the device powered down when not in use.  That should
work well with the suggestion to provide a DAPM callback instead of a a
trigger operation.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20221129/d7d0be6c/attachment.sig>