[PATCH 04/12] arm64: dts: qcom: sm6115: Add TSENS node

[Konrad Dybcio]

On 29.11.2022 21:46, Adam Skladowski wrote:
> Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
> 
> Signed-off-by: Adam Skladowski <a39.skl at gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 2003a2519a54..decbf7ca8a03 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -515,6 +515,17 @@ spmi_bus: spmi at 1c40000 {
>  			#interrupt-cells = <4>;
>  		};
>  
> +		tsens0: thermal-sensor at 4410000 {
> +			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
> +			reg = <0x04411000 0x1ff>, /* TM */
> +			      <0x04410000 0x8>; /* SROT */
> +			#qcom,sensors = <16>;
> +			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		rpm_msg_ram: sram at 45f0000 {
>  			compatible = "qcom,rpm-msg-ram";
>  			reg = <0x045f0000 0x7000>;