[PATCH v2 03/12] arm64: dts: qcom: sm6115: Add cpufreq-hw support

Adam Skladowski a39.skl at gmail.com
Wed Nov 30 20:09:41 UTC 2022


Add cpufreq-hw node and assign qcom,freq-domain properties
to CPUs to enable CPU clock scaling.

Signed-off-by: Adam Skladowski <a39.skl at gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 0340ed21be05..2a55087b103e 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -41,6 +41,7 @@ CPU0: cpu at 0 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -55,6 +56,7 @@ CPU1: cpu at 1 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU2: cpu at 2 {
@@ -65,6 +67,7 @@ CPU2: cpu at 2 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU3: cpu at 3 {
@@ -75,6 +78,7 @@ CPU3: cpu at 3 {
 			dynamic-power-coefficient = <100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 		};
 
 		CPU4: cpu at 100 {
@@ -85,6 +89,7 @@ CPU4: cpu at 100 {
 			capacity-dmips-mhz = <1638>;
 			dynamic-power-coefficient = <282>;
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -99,6 +104,7 @@ CPU5: cpu at 101 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		CPU6: cpu at 102 {
@@ -109,6 +115,7 @@ CPU6: cpu at 102 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		CPU7: cpu at 103 {
@@ -119,6 +126,7 @@ CPU7: cpu at 103 {
 			dynamic-power-coefficient = <282>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 		};
 
 		cpu-map {
@@ -842,6 +850,17 @@ intc: interrupt-controller at f200000 {
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		cpufreq_hw: cpufreq at f521000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
 	};
 
 	timer {
-- 
2.25.1



More information about the dri-devel mailing list