[PATCH v6 07/10] drm: bridge: samsung-dsim: Add atomic_get_input_bus_fmts
Jagan Teki
jagan at amarulasolutions.com
Sat Oct 1 08:06:47 UTC 2022
Finding the right input bus format throughout the pipeline is hard
so add atomic_get_input_bus_fmts callback and initialize with the
default RGB888_1X24 bus format on DSI-end.
This format can be used in pipeline for negotiating bus format between
the DSI-end of this bridge and the other component closer to pipeline
components.
v6, v5, v4:
* none
v3:
* include media-bus-format.h
v2:
* none
v1:
* new patch
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/gpu/drm/bridge/samsung-dsim.c | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index d0bb96a275fd..4fd77172bb4b 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/irq.h>
+#include <linux/media-bus-format.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
@@ -1321,6 +1322,32 @@ static void samsung_dsim_atomic_post_disable(struct drm_bridge *bridge,
pm_runtime_put_sync(dsi->dev);
}
+#define MAX_INPUT_SEL_FORMATS 1
+
+static u32 *
+samsung_dsim_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ /* This is the DSI-end bus format */
+ input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+ *num_input_fmts = 1;
+
+ return input_fmts;
+}
+
static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
@@ -1384,6 +1411,7 @@ static const struct drm_bridge_funcs samsung_dsim_bridge_funcs = {
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_get_input_bus_fmts = samsung_dsim_atomic_get_input_bus_fmts,
.atomic_check = samsung_dsim_atomic_check,
.atomic_pre_enable = samsung_dsim_atomic_pre_enable,
.atomic_enable = samsung_dsim_atomic_enable,
--
2.25.1
More information about the dri-devel
mailing list