[PATCH drm-misc-next v2 7/9] drm/arm/malidp: crtc: protect device resources after removal

Danilo Krummrich dakr at redhat.com
Sat Oct 1 16:39:44 UTC 2022


(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.

However, the DRM device isn't freed as long as the last user didn't
close it, hence userspace can still call into the driver.

Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().

Signed-off-by: Danilo Krummrich <dakr at redhat.com>
---
 drivers/gpu/drm/arm/malidp_crtc.c | 61 +++++++++++++++++++++++++------
 1 file changed, 50 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c
index dc01c43f6193..e11cda5fdeb7 100644
--- a/drivers/gpu/drm/arm/malidp_crtc.c
+++ b/drivers/gpu/drm/arm/malidp_crtc.c
@@ -14,6 +14,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
+#include <drm/drm_drv.h>
 #include <drm/drm_framebuffer.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
@@ -27,6 +28,8 @@ static enum drm_mode_status malidp_crtc_mode_valid(struct drm_crtc *crtc,
 {
 	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
 	struct malidp_hw_device *hwdev = malidp->dev;
+	enum drm_mode_status status = MODE_OK;
+	int idx;
 
 	/*
 	 * check that the hardware can drive the required clock rate,
@@ -34,15 +37,21 @@ static enum drm_mode_status malidp_crtc_mode_valid(struct drm_crtc *crtc,
 	 */
 	long rate, req_rate = mode->crtc_clock * 1000;
 
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return MODE_NOCLOCK;
+
 	if (req_rate) {
 		rate = clk_round_rate(hwdev->pxlclk, req_rate);
 		if (rate != req_rate) {
 			DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
 					 req_rate);
-			return MODE_NOCLOCK;
+			status = MODE_NOCLOCK;
+			goto out;
 		}
 	}
 
+out:
+	drm_dev_exit(idx);
 	return MODE_OK;
 }
 
@@ -52,11 +61,15 @@ static void malidp_crtc_atomic_enable(struct drm_crtc *crtc,
 	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
 	struct malidp_hw_device *hwdev = malidp->dev;
 	struct videomode vm;
-	int err = pm_runtime_get_sync(crtc->dev->dev);
+	int err, idx;
+
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return;
 
+	err = pm_runtime_get_sync(crtc->dev->dev);
 	if (err < 0) {
 		DRM_DEBUG_DRIVER("Failed to enable runtime power management: %d\n", err);
-		return;
+		goto out;
 	}
 
 	drm_display_mode_to_videomode(&crtc->state->adjusted_mode, &vm);
@@ -68,6 +81,9 @@ static void malidp_crtc_atomic_enable(struct drm_crtc *crtc,
 	hwdev->hw->modeset(hwdev, &vm);
 	hwdev->hw->leave_config_mode(hwdev);
 	drm_crtc_vblank_on(crtc);
+
+out:
+	drm_dev_exit(idx);
 }
 
 static void malidp_crtc_atomic_disable(struct drm_crtc *crtc,
@@ -77,7 +93,10 @@ static void malidp_crtc_atomic_disable(struct drm_crtc *crtc,
 									 crtc);
 	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
 	struct malidp_hw_device *hwdev = malidp->dev;
-	int err;
+	int err, idx;
+
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return;
 
 	/* always disable planes on the CRTC that is being turned off */
 	drm_atomic_helper_disable_planes_on_crtc(old_state, false);
@@ -91,6 +110,8 @@ static void malidp_crtc_atomic_disable(struct drm_crtc *crtc,
 	if (err < 0) {
 		DRM_DEBUG_DRIVER("Failed to disable runtime power management: %d\n", err);
 	}
+
+	drm_dev_exit(idx);
 }
 
 static const struct gamma_curve_segment {
@@ -260,7 +281,10 @@ static int malidp_crtc_atomic_check_scaling(struct drm_crtc *crtc,
 	u32 h_upscale_factor = 0; /* U16.16 */
 	u32 v_upscale_factor = 0; /* U16.16 */
 	u8 scaling = cs->scaled_planes_mask;
-	int ret;
+	int idx, ret;
+
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return -ENODEV;
 
 	if (!scaling) {
 		s->scale_enable = false;
@@ -268,8 +292,10 @@ static int malidp_crtc_atomic_check_scaling(struct drm_crtc *crtc,
 	}
 
 	/* The scaling engine can only handle one plane at a time. */
-	if (scaling & (scaling - 1))
-		return -EINVAL;
+	if (scaling & (scaling - 1)) {
+		ret = -EINVAL;
+		goto out;
+	}
 
 	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
 		struct malidp_plane *mp = to_malidp_plane(plane);
@@ -331,10 +357,10 @@ static int malidp_crtc_atomic_check_scaling(struct drm_crtc *crtc,
 
 mclk_calc:
 	drm_display_mode_to_videomode(&state->adjusted_mode, &vm);
-	ret = hwdev->hw->se_calc_mclk(hwdev, s, &vm);
-	if (ret < 0)
-		return -EINVAL;
-	return 0;
+	ret = hwdev->hw->se_calc_mclk(hwdev, s, &vm) < 0 ? -EINVAL : 0;
+out:
+	drm_dev_exit(idx);
+	return ret;
 }
 
 static int malidp_crtc_atomic_check(struct drm_crtc *crtc,
@@ -498,9 +524,16 @@ static int malidp_crtc_enable_vblank(struct drm_crtc *crtc)
 {
 	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
 	struct malidp_hw_device *hwdev = malidp->dev;
+	int idx;
+
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return -ENODEV;
 
 	malidp_hw_enable_irq(hwdev, MALIDP_DE_BLOCK,
 			     hwdev->hw->map.de_irq_map.vsync_irq);
+
+	drm_dev_exit(idx);
+
 	return 0;
 }
 
@@ -508,9 +541,15 @@ static void malidp_crtc_disable_vblank(struct drm_crtc *crtc)
 {
 	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
 	struct malidp_hw_device *hwdev = malidp->dev;
+	int idx;
+
+	if (!drm_dev_enter(&malidp->base, &idx))
+		return;
 
 	malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK,
 			      hwdev->hw->map.de_irq_map.vsync_irq);
+
+	drm_dev_exit(idx);
 }
 
 static const struct drm_crtc_funcs malidp_crtc_funcs = {
-- 
2.37.3



More information about the dri-devel mailing list