[RFC PATCH 4/4] drm/rockchip: rgb: Add dphy connection to rgb output
Michael Trimarchi
michael at amarulasolutions.com
Sun Oct 2 06:45:40 UTC 2022
Dispite the commit 1f0f015151727, the rgb output has an option
to allow to sent the output pin using the dsi/lvds/ttl logic.
The only way to do and stay on the same design is let the
rockchip_rgb block to grab the handle if it is present and
enable it. The present of this handle depends on dts configuration
I have a full working example with an hardware with mixed lines
on direct logic and using the phy, with the follow dts example:
panel: panel {
compatible = "panel-dpi";
...
panel-timing {
clock-frequency = <30000000>;
...
};
port {
panel_rgb_in: endpoint {
remote-endpoint = <&vopb_out_rgb>;
};
};
};
&vopb_out {
vopb_out_rgb: endpoint at 2 {
reg = <2>;
remote-endpoint = <&panel_rgb_in>;
};
};
&vopb {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcdc_rgb_pins>;
pinctrl-1 = <&lcdc_sleep_pins>;
phys = <&dsi_dphy>;
phy-names = "dphy";
};
Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
---
drivers/gpu/drm/rockchip/rockchip_rgb.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_rgb.c b/drivers/gpu/drm/rockchip/rockchip_rgb.c
index 75eb7cca3d82..c725774a0f40 100644
--- a/drivers/gpu/drm/rockchip/rockchip_rgb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_rgb.c
@@ -8,6 +8,7 @@
#include <linux/component.h>
#include <linux/media-bus-format.h>
#include <linux/of_graph.h>
+#include <linux/phy/phy.h>
#include <drm/display/drm_dp_helper.h>
#include <drm/drm_atomic_helper.h>
@@ -30,6 +31,7 @@ struct rockchip_rgb {
struct drm_bridge *bridge;
struct drm_encoder encoder;
struct drm_connector connector;
+ struct phy *dphy;
int output_mode;
};
@@ -168,6 +170,22 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
goto err_free_connector;
}
+ /* PHY */
+ rgb->dphy = devm_phy_get(dev, "dphy");
+ if (!IS_ERR(rgb->dphy)) {
+ ret = phy_init(rgb->dphy);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = phy_set_mode(rgb->dphy, PHY_MODE_TTL);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = phy_power_on(rgb->dphy);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
return rgb;
err_free_connector:
--
2.34.1
More information about the dri-devel
mailing list