[PATCH] dt-bindings: display: panel: use spi-peripheral-props.yaml

[Laurent Pinchart]

Hi Krzysztof,

On Tue, Oct 04, 2022 at 03:10:29PM +0200, Krzysztof Kozlowski wrote:
> On 04/10/2022 15:03, Laurent Pinchart wrote:
> > On Tue, Oct 04, 2022 at 02:09:07PM +0200, Krzysztof Kozlowski wrote:
> >> For devices connectable by SPI bus (e.g. already using
> >> "spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
> >> schema to allow using all SPI device properties, even these which device
> >> bindings author did not tried yet.
> > 
> > Isn't this done implicitly by spi-controller.yaml ? SPI devices that are
> > children of an SPI controller should match the patternProperties
> > "^.*@[0-9a-f]+$" in that file, which has a $ref: spi-peripheral-props.yaml.
> > Is there something I'm missing ?
> 
> You are correct about one side of this - SPI controller bindings.
> However these schemas here have clear: additional/unevaluatedProperties:
> false, thus when they find DTS like:
> panel at xxx {
>   compatible = "one of these spi panels";
>   ...
>   spi-cs-high;
>   spi-rx-delay-us = <50>;
>   ... and some more from specific controllers
> }
> 
> you will get errors, because the panel schema does not allow them.
> 
> The bindings were done (some time ago) in such way, that they require
> that both SPI controller and SPI device reference spi-props.

You're absolutely right that additionalProperties needs to be replaced
by unevaluatedProperties. Can the additions of $ref be dropped, or is
that needed too ?

-- 
Regards,

Laurent Pinchart