[RESEND PATCH v2] drm/mediatek: Add AFBC support to Mediatek DRM driver
Justin Green
greenjustin at chromium.org
Tue Oct 11 18:28:43 UTC 2022
Hi Angelo,
Thanks for the suggestions! I'll upload another patch with those changes.
Re the pitch register math, would it be acceptable to define separate
macros for the LSB and MSB to abstract away the magic numbers? For
example:
#define OVL_PITCH_MSB(n) ((n >> 16) & GENMASK(15, 0))
#define OVL_PITCH_LSB(n) (n & GENMASK(15, 0))
Regards,
Justin
On Tue, Oct 11, 2022 at 5:09 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> Il 10/10/22 17:01, Justin Green ha scritto:
> > From: Justin Green <greenjustin at chromium.org>
> >
> > Add AFBC support to Mediatek DRM driver and enable on MT8195.
> >
> > Tested on MT8195 and confirmed both correct video output and improved DRAM
> > bandwidth performance.
> >
> > v2:
> > Marked mtk_ovl_set_afbc as static, reflowed some lines to fit column
> > limit.
> >
> > Signed-off-by: Justin Green <greenjustin at chromium.org>
>
> Hello Justin,
> thanks for the patch!
>
> However, there's something to improve...
>
> > ---
> > drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 108 ++++++++++++++++++++---
> > drivers/gpu/drm/mediatek/mtk_drm_plane.c | 37 +++++++-
> > drivers/gpu/drm/mediatek/mtk_drm_plane.h | 8 ++
> > 3 files changed, 140 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index 002b0f6cae1a..1724ea85a840 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
>
> ..snip..
>
> > @@ -208,6 +231,8 @@ int mtk_ovl_layer_check(struct device *dev, unsigned int idx,
> > {
> > struct drm_plane_state *state = &mtk_state->base;
> > unsigned int rotation = 0;
> > + unsigned long long modifier;
> > + unsigned int fourcc;
> >
> > rotation = drm_rotation_simplify(state->rotation,
> > DRM_MODE_ROTATE_0 |
> > @@ -226,6 +251,30 @@ int mtk_ovl_layer_check(struct device *dev, unsigned int idx,
> > if (state->fb->format->is_yuv && rotation != 0)
> > return -EINVAL;
> >
> > + if (state->fb->modifier) {
> > + struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
>
> Since you're introducing modifier and fourcc for this branch only, you
> may as well just declare them here instead, but either way is fine.
>
> > +
> > + if (!ovl->data->supports_afbc)
> > + return -EINVAL;
> > +
> > + modifier = state->fb->modifier;
> > +
> > + if (modifier != DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |
> > + AFBC_FORMAT_MOD_SPLIT |
> > + AFBC_FORMAT_MOD_SPARSE))
> > + return -EINVAL;
> > +
> > + fourcc = state->fb->format->format;
> > + if (fourcc != DRM_FORMAT_BGRA8888 &&
> > + fourcc != DRM_FORMAT_ABGR8888 &&
> > + fourcc != DRM_FORMAT_ARGB8888 &&
> > + fourcc != DRM_FORMAT_XRGB8888 &&
> > + fourcc != DRM_FORMAT_XBGR8888 &&
> > + fourcc != DRM_FORMAT_RGB888 &&
> > + fourcc != DRM_FORMAT_BGR888)
> > + return -EINVAL;
> > + }
> > +
> > state->rotation = rotation;
> >
> > return 0;
> > @@ -310,11 +359,14 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
> > struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
> > struct mtk_plane_pending_state *pending = &state->pending;
> > unsigned int addr = pending->addr;
> > - unsigned int pitch = pending->pitch & 0xffff;
> > + unsigned int hdr_addr = pending->hdr_addr;
> > + unsigned int pitch = pending->pitch;
> > + unsigned int hdr_pitch = pending->hdr_pitch;
> > unsigned int fmt = pending->format;
> > unsigned int offset = (pending->y << 16) | pending->x;
> > unsigned int src_size = (pending->height << 16) | pending->width;
> > unsigned int con;
> > + bool is_afbc = pending->modifier;
> >
> > if (!pending->enable) {
> > mtk_ovl_layer_off(dev, idx, cmdq_pkt);
> > @@ -335,16 +387,39 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
> > addr += pending->pitch - 1;
> > }
> >
> > - mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
> > - DISP_REG_OVL_CON(idx));
> > - mtk_ddp_write_relaxed(cmdq_pkt, pitch, &ovl->cmdq_reg, ovl->regs,
> > - DISP_REG_OVL_PITCH(idx));
> > - mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
> > - DISP_REG_OVL_SRC_SIZE(idx));
> > - mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
> > - DISP_REG_OVL_OFFSET(idx));
> > - mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl->regs,
> > - DISP_REG_OVL_ADDR(ovl, idx));
> > + mtk_ovl_set_afbc(dev, cmdq_pkt, idx, is_afbc);
> > + if (!is_afbc) {
> > + mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_CON(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, pitch & 0xFFFF, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_PITCH(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_SRC_SIZE(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_OFFSET(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_ADDR(ovl, idx));
> > + } else {
> > + mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_ADDR(ovl, idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, hdr_addr, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_HDR_ADDR(ovl, idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_SRC_SIZE(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt,
> > + OVL_PITCH_MSB_2ND_SUBBUF | ((pitch >> 16) & 0xFFFF),
>
> I say that this would be more readable if you use bitfield macros instead but,
> anyway, that magic "16" number must get a definition.
> I have the same comment about the GENMASK(15, 0) (== 0xffff), but I know that
> doesn't come from you... would still be nice to also add a definition, which
> is anyway "practically mandatory" if you use FIELD_PREP(mask, val).
>
> > + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH_MSB(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, pitch & 0xFFFF, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_PITCH(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, hdr_pitch, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_HDR_PITCH(ovl, idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_CON(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_OFFSET(idx));
> > + mtk_ddp_write_relaxed(cmdq_pkt, 0, &ovl->cmdq_reg, ovl->regs,
> > + DISP_REG_OVL_CLIP(idx));
> > + }
>
> In any case - are you use that we *must* program the registers in this exact
> sequence?
>
> Here, the OVL layer is supposed to be OFF (OVL_SRC_CON == 0, OVL_RDMA_CTRL == 0)
> so the contents of the registers that you're modifying should not matter at all
> until the layer is turned on.
>
> Note that, in case it doesn't matter, this gets greatly simplified, exactly as:
>
> at the top -- after DISP_REG_OVL_PITCH_MSB(n):
> #define OVL_SRC_PITCH_MSB GENMASK(3, 0)
>
> after DISP_REG_OVL_PITCH(n):
> #define OVL_SRC_PITCH_LSB GENMASK(15, 0)
>
> mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_CON(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, FIELD_PREP(OVL_SRC_PITCH_LSB, pitch),
> &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_SRC_SIZE(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_OFFSET(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_ADDR(ovl, idx));
>
> if (is_afbc) {
> pitch_msb = FIELD_PREP(OVL_SRC_PITCH_MSB, (pitch >> 16));
> pitch_msb |= FIELD_PREP(OVL_PITCH_MSB_2ND_SUBBUF, 1);
> mtk_ddp_write_relaxed(cmdq_pkt, hdr_addr, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_HDR_ADDR(ovl, idx));
> mtk_ddp_write_relaxed(cmdq_pkt, val, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_PITCH_MSB(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, hdr_pitch, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_HDR_PITCH(ovl, idx));
> mtk_ddp_write_relaxed(cmdq_pkt, 0, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_CLIP(idx));
> }
>
> >
> > mtk_ovl_layer_on(dev, idx, cmdq_pkt);
> > }
> > @@ -492,6 +567,15 @@ static const struct mtk_disp_ovl_data mt8192_ovl_2l_driver_data = {
>
> ..snip..
>
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> > index 5c0d9ce69931..734d2554b2b8 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> > @@ -12,6 +12,7 @@
> > #include <drm/drm_framebuffer.h>
> > #include <drm/drm_gem_atomic_helper.h>
> > #include <drm/drm_plane_helper.h>
> > +#include <linux/align.h>
> >
> > #include "mtk_drm_crtc.h"
> > #include "mtk_drm_ddp_comp.h"
> > @@ -52,6 +53,7 @@ static void mtk_plane_reset(struct drm_plane *plane)
> >
> > state->base.plane = plane;
> > state->pending.format = DRM_FORMAT_RGB565;
> > + state->pending.modifier = 0;
> > }
> >
> > static struct drm_plane_state *mtk_plane_duplicate_state(struct drm_plane *plane)
> > @@ -120,21 +122,52 @@ static void mtk_plane_update_new_state(struct drm_plane_state *new_state,
> > struct drm_gem_object *gem;
> > struct mtk_drm_gem_obj *mtk_gem;
> > unsigned int pitch, format;
> > + unsigned long long modifier;
> > dma_addr_t addr;
> > + dma_addr_t hdr_addr = 0;
> > + unsigned int hdr_pitch = 0;
> >
> > gem = fb->obj[0];
> > mtk_gem = to_mtk_gem_obj(gem);
> > addr = mtk_gem->dma_addr;
> > pitch = fb->pitches[0];
> > format = fb->format->format;
> > + modifier = fb->modifier;
> >
> > - addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
> > - addr += (new_state->src.y1 >> 16) * pitch;
> > + if (!modifier) {
> > + addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
> > + addr += (new_state->src.y1 >> 16) * pitch;
> > + } else {
> > + int width_in_blocks = ALIGN(fb->width, AFBC_DATA_BLOCK_WIDTH)
> > + / AFBC_DATA_BLOCK_WIDTH;
> > + int height_in_blocks = ALIGN(fb->height, AFBC_DATA_BLOCK_HEIGHT)
> > + / AFBC_DATA_BLOCK_HEIGHT;
> > + int x_offset_in_blocks = (new_state->src.x1 >> 16) / AFBC_DATA_BLOCK_WIDTH;
> > + int y_offset_in_blocks = (new_state->src.y1 >> 16) / AFBC_DATA_BLOCK_HEIGHT;
> > + int hdr_size;
> > +
> > + hdr_pitch = width_in_blocks * AFBC_HEADER_BLOCK_SIZE;
> > + pitch = width_in_blocks * AFBC_DATA_BLOCK_WIDTH *
> > + AFBC_DATA_BLOCK_HEIGHT * fb->format->cpp[0];
> > +
> > + hdr_size = ALIGN(hdr_pitch * height_in_blocks, AFBC_HEADER_ALIGNMENT);
> > +
> > + hdr_addr = addr + hdr_pitch * y_offset_in_blocks +
> > + AFBC_HEADER_BLOCK_SIZE * x_offset_in_blocks;
> > + // The data plane is offset by 1 additional block.
>
> C-style comments please.
>
> > + addr = addr + hdr_size +
> > + pitch * y_offset_in_blocks +
> > + AFBC_DATA_BLOCK_WIDTH * AFBC_DATA_BLOCK_HEIGHT *
> > + fb->format->cpp[0] * (x_offset_in_blocks + 1);
> > + }
> >
>
> Regards,
> Angelo
>
More information about the dri-devel
mailing list