[PATCH] drm: mediatek: Modify dpi power on/off sequence.

xinlei.lee xinlei.lee at mediatek.com
Wed Oct 12 07:48:46 UTC 2022


On Mon, 2022-09-05 at 21:53 +0800, xinlei.lee at mediatek.com wrote:
> From: Xinlei Lee <xinlei.lee at mediatek.com>
> 
> Modify dpi power on/off sequence so that the first gpio operation
> will take effect.
> 
> Fixes: 6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to
> avoid leakage
> current")
> 
> Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
> 
> ---
> Base on the branch of Linux-next/master.
> Because dpi power_on/off is protected by dpi->refcount, the first
> time
> it cannot be powered on and off successfully, it will cause leakage.
> ---
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 630a4e301ef6..2ce1a39ce3bf 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -462,9 +462,6 @@ static void mtk_dpi_power_off(struct mtk_dpi
> *dpi)
>  	if (--dpi->refcount != 0)
>  		return;
>  
> -	if (dpi->pinctrl && dpi->pins_gpio)
> -		pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
> -
>  	mtk_dpi_disable(dpi);
>  	clk_disable_unprepare(dpi->pixel_clk);
>  	clk_disable_unprepare(dpi->engine_clk);
> @@ -489,9 +486,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>  		goto err_pixel;
>  	}
>  
> -	if (dpi->pinctrl && dpi->pins_dpi)
> -		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
> -
>  	return 0;
>  
>  err_pixel:
> @@ -721,6 +715,9 @@ static void mtk_dpi_bridge_disable(struct
> drm_bridge *bridge)
>  {
>  	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>  
> +	if (dpi->pinctrl && dpi->pins_gpio)
> +		pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
> +
>  	mtk_dpi_power_off(dpi);
>  }
>  
> @@ -728,6 +725,9 @@ static void mtk_dpi_bridge_enable(struct
> drm_bridge *bridge)
>  {
>  	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>  
> +	if (dpi->pinctrl && dpi->pins_dpi)
> +		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
> +
>  	mtk_dpi_power_on(dpi);
>  	mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  	mtk_dpi_enable(dpi);

Hi CK,

Gentle ping for this patch, if there is anything I need to modify,
please kindly let me know.

Best Regards!
xinlei



More information about the dri-devel mailing list