[PATCH v8 00/15] Add PSR support for eDP
Vinod Polimera
quic_vpolimer at quicinc.com
Wed Oct 12 12:02:24 UTC 2022
Changes in v2:
- Use dp bridge to set psr entry/exit instead of dpu_enocder.
- Don't modify whitespaces.
- Set self refresh aware from atomic_check.
- Set self refresh aware only if psr is supported.
- Provide a stub for msm_dp_display_set_psr.
- Move dp functions to bridge code.
Changes in v3:
- Change callback names to reflect atomic interfaces.
- Move bridge callback change to separate patch as suggested by Dmitry.
- Remove psr function declaration from msm_drv.h.
- Set self_refresh_aware flag only if psr is supported.
- Modify the variable names to simpler form.
- Define bit fields for PSR settings.
- Add comments explaining the steps to enter/exit psr.
- Change DRM_INFO to drm_dbg_db.
Changes in v4:
- Move the get crtc functions to drm_atomic.
- Add atomic functions for DP bridge too.
- Add ternary operator to choose eDP or DP ops.
- Return true/false instead of 1/0.
- mode_valid missing in the eDP bridge ops.
- Move the functions to get crtc into drm_atomic.c.
- Fix compilation issues.
- Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc.
- Check for crtc state enable while reserving resources.
Changes in v5:
- Move the mode_valid changes into a different patch.
- Complete psr_op_comp only when isr is set.
- Move the DP atomic callback changes to a different patch.
- Get crtc from drm connector state crtc.
- Move to separate patch for check for crtc state enable while
reserving resources.
Changes in v6:
- Remove crtc from dpu_encoder_virt struct.
- fix crtc check during vblank toggle crtc.
- Misc changes.
Changes in v7:
- Add fix for underrun issue on kasan build.
Changes in v8:
- Drop the enc spinlock as it won't serve any purpose in
protetcing conn state.(Dmitry/Doug)
Signed-off-by: Sankeerth Billakanti <quic_sbillaka at quicinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant at quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer at quicinc.com>
Sankeerth Billakanti (1):
drm/msm/dp: disable self_refresh_aware after entering psr
Vinod Polimera (14):
drm/msm/disp/dpu: clear dpu_assign_crtc and get crtc from connector
state instead of dpu_enc
drm: add helper functions to retrieve old and new crtc
drm/msm/dp: use atomic callbacks for DP bridge ops
drm/msm/dp: Add basic PSR support for eDP
drm/msm/dp: use the eDP bridge ops to validate eDP modes
drm/bridge: use atomic enable/disable callbacks for panel bridge
drm/bridge: add psr support for panel bridge callbacks
drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder
functions
drm/msm/disp/dpu: check for crtc enable rather than crtc active to
release shared resources
drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
drm/msm/disp/dpu: get timing engine status from intf status register
drm/msm/disp/dpu: wait for extra vsync till timing engine status is
disabled
drm/msm/disp/dpu: reset the datapath after timing engine disable
drm/msm/disp/dpu: clear active interface in the datapath cleanup
drivers/gpu/drm/bridge/panel.c | 68 ++++++-
drivers/gpu/drm/drm_atomic.c | 60 ++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 17 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 71 +++----
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 8 -
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 22 +++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 12 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 8 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
drivers/gpu/drm/msm/dp/dp_catalog.c | 80 ++++++++
drivers/gpu/drm/msm/dp/dp_catalog.h | 4 +
drivers/gpu/drm/msm/dp/dp_ctrl.c | 80 ++++++++
drivers/gpu/drm/msm/dp/dp_ctrl.h | 3 +
drivers/gpu/drm/msm/dp/dp_display.c | 36 ++--
drivers/gpu/drm/msm/dp/dp_display.h | 2 +
drivers/gpu/drm/msm/dp/dp_drm.c | 207 ++++++++++++++++++++-
drivers/gpu/drm/msm/dp/dp_drm.h | 9 +-
drivers/gpu/drm/msm/dp/dp_link.c | 36 ++++
drivers/gpu/drm/msm/dp/dp_panel.c | 22 +++
drivers/gpu/drm/msm/dp/dp_panel.h | 6 +
drivers/gpu/drm/msm/dp/dp_reg.h | 27 +++
include/drm/drm_atomic.h | 7 +
23 files changed, 705 insertions(+), 85 deletions(-)
--
2.7.4
More information about the dri-devel
mailing list