[PATCH v2 3/3] drm/bridge: it6505: Improve synchronization between extcon subsystem

Pin-yen Lin treapking at chromium.org
Thu Oct 13 11:04:10 UTC 2022


Originally, the it6505 relies on a short sleep in the IRQ handler and a
long sleep to make sure it6505->lane_swap and it6505->lane_count is
configured in it6505_extcon_work and it6505_detect, respectively.

Use completion and additional DPCD read to remove the unnecessary waits,
and use a different lock for it6505_extcon_work and the threaded IRQ
handler because they no longer need to run exclusively.

The wait time of the completion is usually less than 10ms in local
experiments, but leave it larger here just in case.

Signed-off-by: Pin-yen Lin <treapking at chromium.org>
---

Changes in v2:
- Add the empty line back

 drivers/gpu/drm/bridge/ite-it6505.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 4b6061272599..0de44c651c60 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -412,6 +412,7 @@ struct it6505 {
 	 * Mutex protects extcon and interrupt functions from interfering
 	 * each other.
 	 */
+	struct mutex irq_lock;
 	struct mutex extcon_lock;
 	struct mutex mode_lock; /* used to bridge_detect */
 	struct mutex aux_lock; /* used to aux data transfers */
@@ -440,7 +441,7 @@ struct it6505 {
 	enum hdcp_state hdcp_status;
 	struct delayed_work hdcp_work;
 	struct work_struct hdcp_wait_ksv_list;
-	struct completion wait_edid_complete;
+	struct completion extcon_completion;
 	u8 auto_train_retry;
 	bool hdcp_desired;
 	bool is_repeater;
@@ -2316,8 +2317,8 @@ static void it6505_irq_hpd(struct it6505 *it6505)
 			     it6505->hpd_state ? "high" : "low");
 
 	if (it6505->hpd_state) {
-		wait_for_completion_timeout(&it6505->wait_edid_complete,
-					    msecs_to_jiffies(6000));
+		wait_for_completion_timeout(&it6505->extcon_completion,
+					    msecs_to_jiffies(1000));
 		it6505_aux_on(it6505);
 		if (it6505->dpcd[0] == 0) {
 			it6505_get_dpcd(it6505, DP_DPCD_REV, it6505->dpcd,
@@ -2493,8 +2494,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
 	};
 	int int_status[3], i;
 
-	msleep(100);
-	mutex_lock(&it6505->extcon_lock);
+	mutex_lock(&it6505->irq_lock);
 
 	if (it6505->enable_drv_hold || !it6505->powered)
 		goto unlock;
@@ -2524,7 +2524,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
 	}
 
 unlock:
-	mutex_unlock(&it6505->extcon_lock);
+	mutex_unlock(&it6505->irq_lock);
 
 	return IRQ_HANDLED;
 }
@@ -2701,9 +2701,12 @@ static void it6505_extcon_work(struct work_struct *work)
 		 */
 		if (ret)
 			it6505_poweron(it6505);
+
+		complete_all(&it6505->extcon_completion);
 	} else {
 		DRM_DEV_DEBUG_DRIVER(dev, "start to power off");
 		pm_runtime_put_sync(dev);
+		reinit_completion(&it6505->extcon_completion);
 
 		drm_helper_hpd_irq_event(it6505->bridge.dev);
 		memset(it6505->dpcd, 0, sizeof(it6505->dpcd));
@@ -3274,6 +3277,7 @@ static int it6505_i2c_probe(struct i2c_client *client,
 	if (!it6505)
 		return -ENOMEM;
 
+	mutex_init(&it6505->irq_lock);
 	mutex_init(&it6505->extcon_lock);
 	mutex_init(&it6505->mode_lock);
 	mutex_init(&it6505->aux_lock);
@@ -3329,7 +3333,7 @@ static int it6505_i2c_probe(struct i2c_client *client,
 	INIT_WORK(&it6505->link_works, it6505_link_training_work);
 	INIT_WORK(&it6505->hdcp_wait_ksv_list, it6505_hdcp_wait_ksv_list);
 	INIT_DELAYED_WORK(&it6505->hdcp_work, it6505_hdcp_work);
-	init_completion(&it6505->wait_edid_complete);
+	init_completion(&it6505->extcon_completion);
 	memset(it6505->dpcd, 0, sizeof(it6505->dpcd));
 	it6505->powered = false;
 	it6505->enable_drv_hold = DEFAULT_DRV_HOLD;
-- 
2.38.0.rc1.362.ged0d419d3c-goog



More information about the dri-devel mailing list