[PATCH] dt-bindings: Remove "status" from schema examples, again
Rob Herring
robh at kernel.org
Fri Oct 14 20:51:04 UTC 2022
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
A meta-schema check for this is pending, so hopefully the last time to
fix these.
Fix the indentation in intel,phy-thunderbay-emmc while we're here.
Signed-off-by: Rob Herring <robh at kernel.org>
---
.../arm/tegra/nvidia,tegra-ccplex-cluster.yaml | 1 -
.../display/tegra/nvidia,tegra124-dpaux.yaml | 1 -
.../display/tegra/nvidia,tegra186-display.yaml | 2 --
.../bindings/iio/addac/adi,ad74413r.yaml | 1 -
.../devicetree/bindings/net/cdns,macb.yaml | 1 -
.../devicetree/bindings/net/nxp,dwmac-imx.yaml | 1 -
.../bindings/phy/intel,phy-thunderbay-emmc.yaml | 15 +++++++--------
7 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
index 711bb4d08c60..869c266e7ebc 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -47,5 +47,4 @@ examples:
compatible = "nvidia,tegra234-ccplex-cluster";
reg = <0x0e000000 0x5ffff>;
nvidia,bpmp = <&bpmp>;
- status = "okay";
};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
index 9ab123cd2325..5cdbc527a560 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -128,7 +128,6 @@ examples:
resets = <&tegra_car 181>;
reset-names = "dpaux";
power-domains = <&pd_sor>;
- status = "disabled";
state_dpaux_aux: pinmux-aux {
groups = "dpaux-io";
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
index 8c0231345529..ce5c673f940c 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -138,7 +138,6 @@ examples:
<&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
<&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
clock-names = "disp", "dsc", "hub";
- status = "disabled";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
@@ -227,7 +226,6 @@ examples:
clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
<&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
clock-names = "disp", "hub";
- status = "disabled";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
index 03bb90a7f4f8..d2a9f92c0a6d 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -114,7 +114,6 @@ examples:
#size-cells = <0>;
cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- status = "okay";
ad74413r at 0 {
compatible = "adi,ad74413r";
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index 318f4efe7f6f..bef5e0f895be 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -203,7 +203,6 @@ examples:
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
reset-names = "gem1_rst";
- status = "okay";
phy-mode = "sgmii";
phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
fixed-link {
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index 4c155441acbf..0270b0ca166b 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -92,5 +92,4 @@ examples:
<&clk IMX8MP_CLK_ENET_QOS>;
clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
phy-mode = "rgmii";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
index 34bdb5c4cae8..b09e5ba5e127 100644
--- a/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
@@ -36,11 +36,10 @@ additionalProperties: false
examples:
- |
- mmc_phy at 80440800 {
- #phy-cells = <0x0>;
- compatible = "intel,thunderbay-emmc-phy";
- status = "okay";
- reg = <0x80440800 0x100>;
- clocks = <&emmc>;
- clock-names = "emmcclk";
- };
+ mmc_phy at 80440800 {
+ #phy-cells = <0x0>;
+ compatible = "intel,thunderbay-emmc-phy";
+ reg = <0x80440800 0x100>;
+ clocks = <&emmc>;
+ clock-names = "emmcclk";
+ };
--
2.35.1
More information about the dri-devel
mailing list