[PATCH v8 0/3] Add RZ/G2L DSI driver
Biju Das
biju.das.jz at bp.renesas.com
Sat Oct 15 16:03:02 UTC 2022
Hi Laurent,
> Subject: Re: [PATCH v8 0/3] Add RZ/G2L DSI driver
>
> Hi Biju,
>
> On Sat, Oct 15, 2022 at 01:11:20PM +0000, Biju Das wrote:
> > Gentle ping.
>
> I've reviewed v8, everything looks fine. I've applied the patches to
> my tree ([1]) for v6.2.
Thanks,
Biju
>
> [1] git://linuxtv.org/pinchartl/media.git drm/du/next
>
> > > Subject: [PATCH v8 0/3] Add RZ/G2L DSI driver
> > >
> > > This patch series aims to support the MIPI DSI encoder found in
> the
> > > RZ/G2L SoC. It currently supports DSI video mode only.
> > >
> > > This unit supports MIPI Alliance Specification for Display Serial
> > > Interface (DSI) Specification. This unit provides a solution for
> > > transmitting MIPI DSI compliant digital video and packets.
> Normative
> > > References are below.
> > > * MIPI Alliance Specification for Display Serial Interface Version
> > > 1.3.1
> > > * MIPI Alliance Specification for D-PHY Version 2.1
> > >
> > > The following are key features of this unit.
> > >
> > > * 1 channel
> > > * The number of Lane: 4-lane
> > > * Support up to Full HD (1920 × 1080), 60 fps (RGB888)
> > > * Maximum Bandwidth: 1.5 Gbps per lane
> > > * Support Output Data Format: RGB666 / RGB888
> > >
> > > This patch series is based on drm_misc and patches from
> drm/du/next
> > > [1]
> > >
> > >
> > > v7->v8:
> > > * Added Rb tag from Laurent.
> > > * Added hsfreq_max to struct rzg2l_mipi_dsi_timings.
> > > * Removed enums rzg2l_mipi_dsi_dphy_timings.
> > > * Replaced if else with for loop for finding dphy_timings
> > > based on hsfreq.
> > > * Removed checking "number of lanes capability" from
> rzg2l_mipi_dsi_
> > > startup() and added patch#3 for handling it in probe() and
> enforcing
> > > it in rzg2l_mipi_dsi_host_attach().
> > > * Added Labels with an "err_" prefix.
> > > out_pm_put->err_pm_put
> > > out_assert_rst_and_stop_clocks->err_stop
> > > out_stop_hs_clock->err_stop_clock
> > > out_pm_disable->err_pm_disable
> > > * Added error message for lane check in
> > > rzg2l_mipi_dsi_host_attach()
> > > * Replaced dev_warn->dev_err for the format error in
> rzg2l_mipi_dsi_host
> > > _attach(). Added missing "\n" and print the format for
> debugging.
> > > v6->v7:
> > > * Added rzg2l_mipi_dsi_stop() counterpart of
> rzg2l_mipi_dsi_startup().
> > > * Error labels are named according to the cleanup operation they
> perform.
> > > * Restored Max lane capability read after dphy timing
> initialization
> > > as per the guide lines from SoC design team.
> > > * Added recommended lut values for the Global Operation Timing
> > > parameters for MIPI DPHY.
> > > v5->v6:
> > > * Updated commit description
> > > * Moved handling of arst and prst from rzg2l_mipi_dsi_startup-
> >runtime
> > > PM suspend/resume handlers.
> > > * Max lane capability read at probe(), and enforced in
> > > rzg2l_mipi_dsi_host_attach()
> > > * Simplified vich1ppsetr setting.
> > > * Renamed hsclk_running_mode,hsclk_mode->is_clk_cont.
> > > * Fixed typo in probe error message(arst->rst).
> > > * Reordered DRM bridge initaization in probe()
> > > * Updated typo in e-mail address.
> > > v4->v5:
> > > * Added Ack from Sam.
> > > * Added a trivial change, replaced rzg2l_mipi_dsi_parse_dt()
> > > with drm_of_get_data_lanes_count_ep() in probe.
> > > v3->v4:
> > > * Updated error handling in rzg2l_mipi_dsi_startup() and
> rzg2l_mipi_dsi_atomic_enable().
> > > v2->v3:
> > > * Added Rb tag from Geert and Laurent
> > > * Fixed the typo "Receive" -> "transmit"
> > > * Added accepible values for data-lanes
> > > * Sorted Header file in the example
> > > * Added SoC specific compaible along with generic one.
> > > * pass rzg2l_mipi_dsi pointer to {Link,Phy} register rd/wr
> function instead
> > > of the memory pointer
> > > * Fixed the comment in rzg2l_mipi_dsi_startup()
> > > * Removed unnecessary dbg message from
> rzg2l_mipi_dsi_start_video()
> > > * DRM bridge parameter initialization moved to probe
> > > * Replaced dev_dbg->dev_err in rzg2l_mipi_dsi_parse_dt()
> > > * Inserted the missing blank lane after return in probe()
> > > * Added missing MODULE_DEVICE_TABLE
> > > * Added include linux/bits.h in header file
> > > * Fixed various macros in header file.
> > > * Reorder the make file for DSI, so that it is no more dependent
> > > on RZ/G2L DU patch series.
> > > v1->v2:
> > > * Added full path for dsi-controller.yaml
> > > * Modeled DSI + D-PHY as single block and updated reg property
> > > * Fixed typo D_PHY->D-PHY
> > > * Updated description
> > > * Added interrupts and interrupt-names and updated the example
> > > * Driver rework based on dt-binding changes (DSI + D-PHY) as
> single
> > > block
> > > * Replaced link_mmio and phy_mmio with mmio in struct
> > > rzg2l_mipi_dsi
> > > * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write
> > > and rzg2l_mipi_dsi_link_write
> > > * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read
> > > RFC->v1:
> > > * Added a ref to dsi-controller.yaml.
> > > * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG
> > > and dropped DRM as it is implied by DRM_BRIDGE
> > > * Used devm_reset_control_get_exclusive() for reset handle
> > > * Removed bool hsclkmode from struct rzg2l_mipi_dsi
> > > * Added error check for pm, using pm_runtime_resume_and_get()
> instead of
> > > pm_runtime_get_sync()
> > > * Added check for unsupported formats in
> > > rzg2l_mipi_dsi_host_attach()
> > > * Avoided read-modify-write stopping hsclock
> > > * Used devm_platform_ioremap_resource for resource allocation
> > > * Removed unnecessary assert call from probe and remove.
> > > * wrap the line after the PTR_ERR() in probe()
> > > * Updated reset failure messages in probe
> > > * Fixed the typo arstc->prstc
> > > * Made hex constants to lower case.
> > > RFC:
> > > *
> > >
> > >
> > > Biju Das (3):
> > > dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX
> bindings
> > > drm: rcar-du: Add RZ/G2L DSI driver
> > > drm: rcar-du: rzg2l_mipi_dsi: Enhance device lanes check
> > >
> > > .../bindings/display/bridge/renesas,dsi.yaml | 182 ++++
> > > drivers/gpu/drm/rcar-du/Kconfig | 8 +
> > > drivers/gpu/drm/rcar-du/Makefile | 2 +
> > > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 816
> ++++++++++++++++++
> > > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 151 ++++
> > > 5 files changed, 1159 insertions(+) create mode 100644
> > > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
> > > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
>
> --
> Regards,
>
> Laurent Pinchart
More information about the dri-devel
mailing list