[PATCH] drm/vc4: vec: Add support for PAL-60

Mateusz Kwiatkowski kfyatek at gmail.com
Sun Oct 16 19:46:49 UTC 2022


Add support for the PAL-60 mode. Because there is no separate TV mode
property value for PAL-60, this requires matching the settings based on
the modeline in addition to just that property alone.

Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
---
This patch depends on patch
'[PATCH v5 21/22] drm/vc4: vec: Add support for more analog TV standards'
submitted by Maxime Ripard
(https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v5-21-d841cc64fe4b@cerno.tech/).

To Maxime: if you decide to post v6, feel free to include this in your patchset
instead if you want.
---
 drivers/gpu/drm/vc4/vc4_vec.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 88b4330bfa39..bbc41e502cc3 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -235,6 +235,7 @@ enum vc4_vec_tv_mode_id {
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -270,37 +271,52 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
 		.custom_freq = 0x2a098acb,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_N_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_SECAM_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 		.custom_freq = 0x29c71c72,
@@ -308,14 +324,15 @@ static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -394,6 +411,7 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -551,13 +569,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 

base-commit: e16415e3ddae9abb14a00793554a162403f9af6d
-- 
2.34.1



More information about the dri-devel mailing list