[PATCH v4 15/17] drm/i915/vm_bind: Handle persistent vmas in execbuf3

Matthew Auld matthew.auld at intel.com
Thu Oct 20 16:39:46 UTC 2022


On 18/10/2022 08:16, Niranjana Vishwanathapura wrote:
> Handle persistent (VM_BIND) mappings during the request submission
> in the execbuf3 path.
> 
> v2: Ensure requests wait for bindings to complete.
> v3: Remove short term pinning with PIN_VALIDATE flag.
>      Individualize fences before adding to dma_resv obj.
> 
> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura at intel.com>
> Signed-off-by: Andi Shyti <andi.shyti at linux.intel.com>
> ---
>   .../gpu/drm/i915/gem/i915_gem_execbuffer3.c   | 208 +++++++++++++++++-
>   1 file changed, 207 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer3.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer3.c
> index a9b4cc44bf66..8120e4c6b7da 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer3.c
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer3.c
> @@ -3,6 +3,7 @@
>    * Copyright © 2022 Intel Corporation
>    */
>   
> +#include <linux/dma-fence-array.h>
>   #include <linux/dma-resv.h>
>   #include <linux/uaccess.h>
>   
> @@ -19,6 +20,7 @@
>   #include "i915_gem_vm_bind.h"
>   #include "i915_trace.h"
>   
> +#define __EXEC3_HAS_PIN			BIT_ULL(33)
>   #define __EXEC3_ENGINE_PINNED		BIT_ULL(32)
>   #define __EXEC3_INTERNAL_FLAGS		(~0ull << 32)
>   
> @@ -42,7 +44,9 @@
>    * execlist. Hence, no support for implicit sync.
>    *
>    * The new execbuf3 ioctl only works in VM_BIND mode and the VM_BIND mode only
> - * works with execbuf3 ioctl for submission.
> + * works with execbuf3 ioctl for submission. All BOs mapped on that VM (through
> + * VM_BIND call) at the time of execbuf3 call are deemed required for that
> + * submission.
>    *
>    * The execbuf3 ioctl directly specifies the batch addresses instead of as
>    * object handles as in execbuf2 ioctl. The execbuf3 ioctl will also not
> @@ -58,6 +62,13 @@
>    * So, a lot of code supporting execbuf2 ioctl, like relocations, VA evictions,
>    * vma lookup table, implicit sync, vma active reference tracking etc., are not
>    * applicable for execbuf3 ioctl.
> + *
> + * During each execbuf submission, request fence is added to all VM_BIND mapped
> + * objects with DMA_RESV_USAGE_BOOKKEEP. The DMA_RESV_USAGE_BOOKKEEP usage will
> + * prevent over sync (See enum dma_resv_usage). Note that DRM_I915_GEM_WAIT and
> + * DRM_I915_GEM_BUSY ioctls do not check for DMA_RESV_USAGE_BOOKKEEP usage and
> + * hence should not be used for end of batch check. Instead, the execbuf3
> + * timeline out fence should be used for end of batch check.
>    */
>   
>   /**
> @@ -127,6 +138,23 @@ eb_find_vma(struct i915_address_space *vm, u64 addr)
>   	return i915_gem_vm_bind_lookup_vma(vm, va);
>   }
>   
> +static void eb_scoop_unbound_vma_all(struct i915_address_space *vm)
> +{
> +	struct i915_vma *vma, *vn;
> +
> +	/**
> +	 * Move all unbound vmas back into vm_bind_list so that they are
> +	 * revalidated.
> +	 */
> +	spin_lock(&vm->vm_rebind_lock);
> +	list_for_each_entry_safe(vma, vn, &vm->vm_rebind_list, vm_rebind_link) {
> +		list_del_init(&vma->vm_rebind_link);
> +		if (!list_empty(&vma->vm_bind_link))
> +			list_move_tail(&vma->vm_bind_link, &vm->vm_bind_list);
> +	}
> +	spin_unlock(&vm->vm_rebind_lock);
> +}
> +
>   static int eb_lookup_vma_all(struct i915_execbuffer *eb)
>   {
>   	unsigned int i, current_batch = 0;
> @@ -141,14 +169,108 @@ static int eb_lookup_vma_all(struct i915_execbuffer *eb)
>   		++current_batch;
>   	}
>   
> +	eb_scoop_unbound_vma_all(eb->context->vm);
> +
> +	return 0;
> +}
> +
> +static int eb_lock_vma_all(struct i915_execbuffer *eb)
> +{
> +	struct i915_address_space *vm = eb->context->vm;
> +	struct i915_vma *vma;
> +	int err;
> +
> +	err = i915_gem_object_lock(eb->context->vm->root_obj, &eb->ww);
> +	if (err)
> +		return err;
> +
> +	list_for_each_entry(vma, &vm->non_priv_vm_bind_list,
> +			    non_priv_vm_bind_link) {
> +		err = i915_gem_object_lock(vma->obj, &eb->ww);
> +		if (err)
> +			return err;
> +	}
> +
>   	return 0;
>   }
>   
> +static void eb_release_persistent_vma_all(struct i915_execbuffer *eb)
> +{
> +	struct i915_address_space *vm = eb->context->vm;
> +	struct i915_vma *vma, *vn;
> +
> +	lockdep_assert_held(&vm->vm_bind_lock);
> +
> +	if (!(eb->args->flags & __EXEC3_HAS_PIN))
> +		return;
> +
> +	assert_object_held(vm->root_obj);
> +
> +	list_for_each_entry_safe(vma, vn, &vm->vm_bind_list, vm_bind_link)
> +		if (i915_vma_verify_bind_complete(vma))
> +			list_move_tail(&vma->vm_bind_link, &vm->vm_bound_list);
> +
> +	eb->args->flags &= ~__EXEC3_HAS_PIN;
> +}
> +
>   static void eb_release_vma_all(struct i915_execbuffer *eb)
>   {
> +	eb_release_persistent_vma_all(eb);
>   	eb_unpin_engine(eb);
>   }
>   
> +static int eb_reserve_fence_for_persistent_vma_all(struct i915_execbuffer *eb)
> +{
> +	struct i915_address_space *vm = eb->context->vm;
> +	u64 num_fences = 1;
> +	struct i915_vma *vma;
> +	int ret;
> +
> +	/* Reserve enough slots to accommodate composite fences */
> +	if (intel_context_is_parallel(eb->context))
> +		num_fences = eb->num_batches;
> +
> +	ret = dma_resv_reserve_fences(vm->root_obj->base.resv, num_fences);
> +	if (ret)
> +		return ret;
> +
> +	list_for_each_entry(vma, &vm->non_priv_vm_bind_list,
> +			    non_priv_vm_bind_link) {
> +		ret = dma_resv_reserve_fences(vma->obj->base.resv, num_fences);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int eb_validate_persistent_vma_all(struct i915_execbuffer *eb)
> +{
> +	struct i915_address_space *vm = eb->context->vm;
> +	struct i915_vma *vma;
> +	int ret = 0;
> +
> +	lockdep_assert_held(&vm->vm_bind_lock);
> +	assert_object_held(vm->root_obj);
> +
> +	ret = eb_reserve_fence_for_persistent_vma_all(eb);
> +	if (ret)
> +		return ret;
> +
> +	list_for_each_entry(vma, &vm->vm_bind_list, vm_bind_link) {
> +		u64 pin_flags = vma->start | PIN_OFFSET_FIXED |
> +				PIN_USER | PIN_VALIDATE;

Should we also add NOEVICT here and in vm_bind? Or is eviction somehow 
still desired in vm_bind world?

> +
> +		ret = i915_vma_pin_ww(vma, &eb->ww, 0, 0, pin_flags);
> +		if (ret)
> +			break;
> +
> +		eb->args->flags |= __EXEC3_HAS_PIN;
> +	}
> +
> +	return ret;
> +}
> +
>   /*
>    * Using two helper loops for the order of which requests / batches are created
>    * and added the to backend. Requests are created in order from the parent to
> @@ -160,13 +282,80 @@ static void eb_release_vma_all(struct i915_execbuffer *eb)
>    */
>   #define for_each_batch_create_order(_eb) \
>   	for (unsigned int i = 0; i < (_eb)->num_batches; ++i)
> +#define for_each_batch_add_order(_eb) \
> +	for (int i = (_eb)->num_batches - 1; i >= 0; --i)
> +
> +static void __eb_persistent_add_shared_fence(struct drm_i915_gem_object *obj,
> +					     struct dma_fence *fence)
> +{
> +	struct dma_fence *curr;
> +	int idx;
> +
> +	dma_fence_array_for_each(curr, idx, fence)
> +		dma_resv_add_fence(obj->base.resv, curr,
> +				   DMA_RESV_USAGE_BOOKKEEP);
> +
> +	obj->write_domain = 0;
> +	obj->read_domains |= I915_GEM_GPU_DOMAINS;
> +	obj->mm.dirty = true;
> +}
> +
> +static void eb_persistent_add_shared_fence(struct i915_execbuffer *eb)
> +{
> +	struct i915_address_space *vm = eb->context->vm;
> +	struct dma_fence *fence;
> +	struct i915_vma *vma;
> +
> +	fence = eb->composite_fence ? eb->composite_fence :
> +		&eb->requests[0]->fence;
> +
> +	__eb_persistent_add_shared_fence(vm->root_obj, fence);
> +	list_for_each_entry(vma, &vm->non_priv_vm_bind_list,
> +			    non_priv_vm_bind_link)
> +		__eb_persistent_add_shared_fence(vma->obj, fence);
> +}
> +
> +static void eb_move_all_persistent_vma_to_active(struct i915_execbuffer *eb)
> +{
> +	/* Add fence to BOs dma-resv fence list */
> +	eb_persistent_add_shared_fence(eb);
> +}
>   
>   static int eb_move_to_gpu(struct i915_execbuffer *eb)
>   {
> +	struct i915_address_space *vm = eb->context->vm;
> +	struct i915_vma *vma;
> +	int err = 0;
> +
> +	lockdep_assert_held(&vm->vm_bind_lock);
> +	assert_object_held(vm->root_obj);
> +
> +	eb_move_all_persistent_vma_to_active(eb);
> +
> +	list_for_each_entry(vma, &vm->vm_bind_list, vm_bind_link) {
> +		for_each_batch_add_order(eb) {
> +			if (!eb->requests[i])
> +				continue;
> +
> +			err = i915_request_await_bind(eb->requests[i], vma);
> +			if (err)
> +				goto err_skip;
> +		}
> +	}
> +
>   	/* Unconditionally flush any chipset caches (for streaming writes). */
>   	intel_gt_chipset_flush(eb->gt);
>   
>   	return 0;
> +
> +err_skip:
> +	for_each_batch_create_order(eb) {
> +		if (!eb->requests[i])
> +			break;
> +
> +		i915_request_set_error_once(eb->requests[i], err);
> +	}
> +	return err;
>   }
>   
>   static int eb_request_submit(struct i915_execbuffer *eb,
> @@ -483,6 +672,7 @@ i915_gem_do_execbuffer(struct drm_device *dev,
>   
>   	mutex_lock(&eb.context->vm->vm_bind_lock);
>   
> +lookup_vmas:
>   	err = eb_lookup_vma_all(&eb);
>   	if (err) {
>   		eb_release_vma_all(&eb);
> @@ -499,6 +689,22 @@ i915_gem_do_execbuffer(struct drm_device *dev,
>   	/* only throttle once, even if we didn't need to throttle */
>   	throttle = false;
>   
> +	err = eb_lock_vma_all(&eb);
> +	if (err)
> +		goto err_validate;
> +
> +	/**
> +	 * No object unbinds possible once the objects are locked. So,
> +	 * check for any unbinds here, which needs to be scooped up.
> +	 */
> +	if (!list_empty(&eb.context->vm->vm_rebind_list)) {
> +		eb_release_vma_all(&eb);
> +		i915_gem_ww_ctx_fini(&eb.ww);
> +		goto lookup_vmas;
> +	}
> +
> +	err = eb_validate_persistent_vma_all(&eb);
> +
>   err_validate:
>   	if (err == -EDEADLK) {
>   		eb_release_vma_all(&eb);


More information about the dri-devel mailing list