[PATCH v4 1/4] gpu: drm: meson: Use devm_regulator_*get_enable*()

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Oct 21 15:02:31 UTC 2022


Hi Matti,

On Fri, Oct 21, 2022 at 04:18:01PM +0300, Matti Vaittinen wrote:
> Simplify using the devm_regulator_get_enable_optional(). Also drop the
> seemingly unused struct member 'hdmi_supply'.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount at gmail.com>
> 
> ---
> v3 => v4:
> - split meson part to own patch
> 
> RFCv1 => v2:
> - Change also sii902x to use devm_regulator_bulk_get_enable()
> 
> Please note - this is only compile-tested due to the lack of HW. Careful
> review and testing is _highly_ appreciated.
> ---
>  drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++--------------------
>  1 file changed, 3 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index 5cd2b2ebbbd3..7642f740272b 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -140,7 +140,6 @@ struct meson_dw_hdmi {
>  	struct reset_control *hdmitx_apb;
>  	struct reset_control *hdmitx_ctrl;
>  	struct reset_control *hdmitx_phy;
> -	struct regulator *hdmi_supply;
>  	u32 irq_stat;
>  	struct dw_hdmi *hdmi;
>  	struct drm_bridge *bridge;
> @@ -665,11 +664,6 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
>  
>  }
>  
> -static void meson_disable_regulator(void *data)
> -{
> -	regulator_disable(data);
> -}
> -
>  static void meson_disable_clk(void *data)
>  {
>  	clk_disable_unprepare(data);
> @@ -723,20 +717,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
>  	meson_dw_hdmi->data = match;
>  	dw_plat_data = &meson_dw_hdmi->dw_plat_data;
>  
> -	meson_dw_hdmi->hdmi_supply = devm_regulator_get_optional(dev, "hdmi");
> -	if (IS_ERR(meson_dw_hdmi->hdmi_supply)) {
> -		if (PTR_ERR(meson_dw_hdmi->hdmi_supply) == -EPROBE_DEFER)
> -			return -EPROBE_DEFER;
> -		meson_dw_hdmi->hdmi_supply = NULL;
> -	} else {
> -		ret = regulator_enable(meson_dw_hdmi->hdmi_supply);
> -		if (ret)
> -			return ret;
> -		ret = devm_add_action_or_reset(dev, meson_disable_regulator,
> -					       meson_dw_hdmi->hdmi_supply);
> -		if (ret)
> -			return ret;
> -	}
> +	ret = devm_regulator_get_enable_optional(dev, "hdmi");
> +	if (ret != -ENODEV)
> +		return ret;

As noted in the review of the series that introduced
devm_regulator_get_enable_optional(), the right thing to do is to
implement runtime PM in this driver to avoid wasting power.

>  
>  	meson_dw_hdmi->hdmitx_apb = devm_reset_control_get_exclusive(dev,
>  						"hdmitx_apb");

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list