[PATCH v3 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS
Bjorn Andersson
quic_bjorande at quicinc.com
Wed Oct 26 03:26:13 UTC 2022
From: Bjorn Andersson <bjorn.andersson at linaro.org>
Add binding for the display subsystem and display processing unit in the
Qualcomm SC8280XP platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
Changes since v2:
- Cleaned up description and interconnect definitions
- Added opp-table
.../bindings/display/msm/dpu-sc8280xp.yaml | 287 ++++++++++++++++++
1 file changed, 287 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
new file mode 100644
index 000000000000..24e7a1562fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Processing Unit for SC8280XP
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson at linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-mdss
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: mdss
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+ "#interrupt-cells":
+ const: 1
+
+ iommus:
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+ ranges: true
+
+ interconnects:
+ items:
+ - description: Interconnect path for first data bus
+ - description: Interconnect path for second data bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+
+ resets:
+ items:
+ - description: MDSS_CORE reset
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ description: Node containing the properties of DPU.
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. Each output port contains an endpoint that
+ describes how it is connected to an external interface.
+
+ patternProperties:
+ '^port@[0-8]$':
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPU interfaces
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - power-domains
+ - clocks
+ - interrupts
+ - interrupt-controller
+ - iommus
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem at ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <460000000>;
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller at ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port at 4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port at 5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port at 6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
+
--
2.37.3
More information about the dri-devel
mailing list