[PATCH v3 09/12] drm/msm/dp: HPD handling relates to next_bridge
Bjorn Andersson
quic_bjorande at quicinc.com
Wed Oct 26 03:26:21 UTC 2022
From: Bjorn Andersson <bjorn.andersson at linaro.org>
The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller.
Most of the logic for enabling and disabling the HPD-related interrupts
is conditioned on the presence of an EDP panel, but more generically
designs that has a downstream drm_bridge (next_bridge) could use this to
handle the HPD interrupts, instead of the internal mechanism.
So replace the current is_edp-based guards with a check for the presence
of next_bridge.
Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
Changes since v2:
- None
drivers/gpu/drm/msm/dp/dp_display.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 3d365950de0f..224ae3aa07c4 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -610,7 +610,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
}
/* enable HDP irq_hpd/replug interrupt */
- if (!dp->dp_display.is_edp)
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
true);
@@ -653,7 +653,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp->dp_display.connector_type, state);
/* disable irq_hpd/replug interrupts */
- if (!dp->dp_display.is_edp)
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
false);
@@ -682,7 +682,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
}
/* disable HPD plug interrupts */
- if (!dp->dp_display.is_edp)
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
/*
@@ -701,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp_display_handle_plugged_change(&dp->dp_display, false);
/* enable HDP plug interrupt to prepare for next plugin */
- if (!dp->dp_display.is_edp)
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
@@ -1086,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
dp_display_host_init(dp);
dp_catalog_ctrl_hpd_config(dp->catalog);
- /* Enable plug and unplug interrupts only for external DisplayPort */
- if (!dp->dp_display.is_edp)
+ /* Enable plug and unplug interrupts only if not handled by next_bridge */
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1379,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
dp_catalog_ctrl_hpd_config(dp->catalog);
-
- if (!dp->dp_display.is_edp)
+ if (!dp->dp_display.next_bridge)
dp_catalog_hpd_config_intr(dp->catalog,
DP_DP_HPD_PLUG_INT_MASK |
DP_DP_HPD_UNPLUG_INT_MASK,
--
2.37.3
More information about the dri-devel
mailing list