[PATCH v3 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
Bjorn Andersson
quic_bjorande at quicinc.com
Wed Oct 26 03:26:24 UTC 2022
From: Bjorn Andersson <bjorn.andersson at linaro.org>
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
Changes since v2:
- New patch on list
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 244 ++++++++++++++++++++++-
1 file changed, 242 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2c62ba6a49c5..f35345115c85 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_phy_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_phy_out>;
+ };
+ };
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_phy_out>;
+ };
+ };
+ };
+
+ edp2-connector {
+ compatible = "dp-connector";
+ label = "EDP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp3-connector {
+ compatible = "dp-connector";
+ label = "EDP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp3_phy_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11g: ldo11 {
+ regulator-name = "vreg_l11g";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&dispcc1 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp0_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss0_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss1_dp0_phy_out: endpoint {
+ remote-endpoint = <&dp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss1_dp1_phy_out: endpoint {
+ remote-endpoint = <&dp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss1_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ mdss1_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
&qup2 {
status = "okay";
};
--
2.37.3
More information about the dri-devel
mailing list