[PATCH 2/5] drm/amdgpu: stop resubmitting jobs for bare metal reset

Christian König christian.koenig at amd.com
Thu Oct 27 06:04:24 UTC 2022


Hi Shaoyun,

yes, absolutely. If you say that this is ok then I'm fine with that as well.

Thanks,
Christian.

Am 26.10.22 um 20:13 schrieb Liu, Shaoyun:
> [AMD Official Use Only - General]
>
> The SRIOV already has its own reset routine amdgpu_device_reset_sriov,  we try to put the sriov specific sequence  inside this function. For the rest part(re-submitting etc ) we should try to have the same  behavior as bare-metal.
> Can  we just don't do the re-submission for all kind of reset since kernel already signal the reset event  to user level (at least for compute stack) ?
>
> Regard
> Sshaoyun.liu
>
> -----Original Message-----
> From: Koenig, Christian <Christian.Koenig at amd.com>
> Sent: Wednesday, October 26, 2022 1:27 PM
> To: Liu, Shaoyun <Shaoyun.Liu at amd.com>; Tuikov, Luben <Luben.Tuikov at amd.com>; Prosyak, Vitaly <Vitaly.Prosyak at amd.com>; Deucher, Alexander <Alexander.Deucher at amd.com>; daniel.vetter at ffwll.ch; amd-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org
> Subject: Re: [PATCH 2/5] drm/amdgpu: stop resubmitting jobs for bare metal reset
>
> The problem is that this re-submitting is currently an integral part of how SRIOV works.
>
> The host can send a function level reset request to the clients when it sees that some schedule switching didn't worked as expected and in this case (and only this case) the hardware has actually never started to even work on the IBs. So the re-submission is actually save from this side.
>
> But in general you are right, the sw side is just completely broken because we came up with a bunch of rather strict rules for the dma_fence implementation (and those rules are perfectly valid and necessary).
>
> Regards,
> Christian.
>
> Am 26.10.22 um 18:10 schrieb Liu, Shaoyun:
>> [AMD Official Use Only - General]
>>
>> The  user space  shouldn't care about  SRIOV or not ,  I don't think we need to keep the re-submission for SRIOV as well.  The reset from SRIOV could trigger the  host do a whole GPU reset which will have the same issue as bare metal.
>>
>> Regards
>> Shaoyun.liu
>>
>> -----Original Message-----
>> From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of
>> Christian König
>> Sent: Wednesday, October 26, 2022 11:36 AM
>> To: Tuikov, Luben <Luben.Tuikov at amd.com>; Prosyak, Vitaly
>> <Vitaly.Prosyak at amd.com>; Deucher, Alexander
>> <Alexander.Deucher at amd.com>; daniel.vetter at ffwll.ch;
>> amd-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org
>> Cc: Koenig, Christian <Christian.Koenig at amd.com>
>> Subject: [PATCH 2/5] drm/amdgpu: stop resubmitting jobs for bare metal
>> reset
>>
>> Re-submitting IBs by the kernel has many problems because pre- requisite state is not automatically re-created as well. In other words neither binary semaphores nor things like ring buffer pointers are in the state they should be when the hardware starts to work on the IBs again.
>>
>> Additional to that even after more than 5 years of developing this feature it is still not stable and we have massively problems getting the reference counts right.
>>
>> As discussed with user space developers this behavior is not helpful in the first place. For graphics and multimedia workloads it makes much more sense to either completely re-create the context or at least re-submitting the IBs from userspace.
>>
>> For compute use cases re-submitting is also not very helpful since userspace must rely on the accuracy of the result.
>>
>> Because of this we stop this practice and instead just properly note that the fence submission was canceled. The only use case we keep the re-submission for now is SRIOV and function level resets.
>>
>> Signed-off-by: Christian König <christian.koenig at amd.com>
>> ---
>>    drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 ++-
>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> index d4584e577b51..39e94feba1ac 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> @@ -5288,7 +5288,8 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev,
>>                                   continue;
>>
>>                           /* No point to resubmit jobs if we didn't HW reset*/
>> -                       if (!tmp_adev->asic_reset_res && !job_signaled)
>> +                       if (!tmp_adev->asic_reset_res && !job_signaled &&
>> +                           amdgpu_sriov_vf(tmp_adev))
>>
>> drm_sched_resubmit_jobs(&ring->sched);
>>
>>                           drm_sched_start(&ring->sched,
>> !tmp_adev->asic_reset_res);
>> --
>> 2.25.1
>>



More information about the dri-devel mailing list