[PATCH v7 00/10] drm: bridge: Add Samsung MIPI DSIM bridge

Sébastien Szymanski sebastien.szymanski at armadeus.com
Fri Oct 28 14:37:13 UTC 2022


Hello Jagan,

On 10/5/22 17:12, Jagan Teki wrote:
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
> 
> The final bridge supports both the Exynos and i.MX8MM DSI devices.
> 
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
> 
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
> 
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
> 
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
> 
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
> 
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
> 
> Patch 0001: 	Samsung DSIM bridge
> 
> Patch 0002:	PHY optional
> 
> Patch 0003:	OF-graph or Child node lookup
> 
> Patch 0004: 	DSI host initialization
> 
> Patch 0005:	atomic check
> 
> Patch 0006:	PMS_P offset via plat data
> 
> Patch 0007:	atomic_get_input_bus_fmts
> 
> Patch 0008:	input_bus_flags
> 
> Patch 0009:	document fsl,imx8mm-mipi-dsim
> 
> Patch 0010:	add i.MX8MM DSIM support
> 
> Tested in Engicam i.Core MX8M Mini SoM.
> 
> Repo:
> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v7
> 
> Any inputs?

I tried this series on Armadeus OPOS8MM Dev (i.MX8MM) board with the 
PowerTrip PH720128T004-ZBC02 DSI panel  (720x1280, 2 lanes).

It works after I fixed the logic of some video mode flags:

in function samsung_dsim_init_link(struct samsung_dsim *dsi):

-if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP))
+if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP)
	reg |= DSIM_HFP_MODE;

The bit has to be set to disable HFP.
Same logic for HPB, HSA and EOT packets.

Regards,

> Jagan.
> 
> Jagan Teki (10):
>    drm: bridge: Add Samsung DSIM bridge driver
>    drm: bridge: samsung-dsim: Lookup OF-graph or Child node devices
>    drm: bridge: samsung-dsim: Mark PHY as optional
>    drm: bridge: samsung-dsim: Handle proper DSI host initialization
>    drm: bridge: samsung-dsim: Add atomic_check
>    drm: bridge: samsung-dsim: Add platform PLL_P (PMS_P) offset
>    drm: bridge: samsung-dsim: Add atomic_get_input_bus_fmts
>    drm: bridge: samsung-dsim: Add input_bus_flags
>    dt-bindings: display: exynos: dsim: Add NXP i.MX8MM support
>    drm: bridge: samsung-dsim: Add i.MX8MM support
> 
>   .../bindings/display/exynos/exynos_dsim.txt   |    1 +
>   MAINTAINERS                                   |    9 +
>   drivers/gpu/drm/bridge/Kconfig                |   12 +
>   drivers/gpu/drm/bridge/Makefile               |    1 +
>   drivers/gpu/drm/bridge/samsung-dsim.c         | 1856 +++++++++++++++++
>   drivers/gpu/drm/exynos/Kconfig                |    1 +
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1766 +---------------
>   include/drm/bridge/samsung-dsim.h             |  115 +
>   8 files changed, 2108 insertions(+), 1653 deletions(-)
>   create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>   create mode 100644 include/drm/bridge/samsung-dsim.h
> 

-- 
Sébastien Szymanski, Armadeus Systems
Software engineer



More information about the dri-devel mailing list