[PATCH v6 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Sep 1 10:23:04 UTC 2022
Move properties common to all DPU DT nodes to the dpu-common.yaml.
Note, this removes description of individual DPU port@ nodes. However
such definitions add no additional value. The reg values do not
correspond to hardware INTF indices. The driver discovers and binds
these ports not paying any care for the order of these items. Thus just
leave the reference to graph.yaml#/properties/ports and the description.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../bindings/display/msm/dpu-common.yaml | 44 ++++++++++++++++++
.../bindings/display/msm/dpu-msm8998.yaml | 46 ++-----------------
.../bindings/display/msm/dpu-qcm2290.yaml | 41 ++---------------
.../bindings/display/msm/dpu-sc7180.yaml | 45 ++----------------
.../bindings/display/msm/dpu-sc7280.yaml | 45 ++----------------
.../bindings/display/msm/dpu-sdm845.yaml | 46 ++-----------------
6 files changed, 64 insertions(+), 203 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 000000000000..bf5764e9932b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,44 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties (common properties)
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn at quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
+ - Rob Clark <robdclark at gmail.com>
+
+description: |
+ Common properties for QCom DPU display controller.
+
+properties:
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
index 253665c693e6..0d6743eabd27 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -62,7 +62,10 @@ patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
+
+ allOf:
+ - $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
@@ -99,47 +102,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port at 0
- - port at 1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
index c5824e1d2382..bec3c131c0dc 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -74,7 +74,10 @@ patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
+
+ allOf:
+ - $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
@@ -107,42 +110,6 @@ patternProperties:
- const: lut
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
index 4890bc25f3fd..732b9d8f968a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -73,7 +73,10 @@ patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
+
+ allOf:
+ - $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
@@ -108,46 +111,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 2:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF0 (DP)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
index 584d646021d5..4889129660c6 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -72,7 +72,10 @@ patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
+
+ allOf:
+ - $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
@@ -106,46 +109,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF5 (EDP)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
index ff19555d04e2..b275f928a921 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -75,7 +75,10 @@ patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
+
+ allOf:
+ - $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
@@ -108,47 +111,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port at 0
- - port at 1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
--
2.35.1
More information about the dri-devel
mailing list