Re: [RESEND PATCH libdrm v3 2/2] tests/modetest: Add support for writeback connector
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Sep 2 06:40:44 UTC 2022
On 2 September 2022 02:09:24 GMT+03:00, Jessica Zhang <quic_jesszhan at quicinc.com> wrote:
>From: Rohith Iyer <quic_rohiiyer at quicinc.com>
>
>Add writeback support to modetest with the below options:
>
>- Passing in -c will now also show the writeback connector
>
>- Test a built-in mode on writeback connector
>
>- Test a custom mode from user input on writeback connector
> Usage: "./modetest -M msm -x <connector_id>:<mode_parameters>
> -a -P <plane_id>@<crtc_id>:<widthxheight>+0+0 at RG24."
> Refer to --help for exact syntax
>
>- Dump the writeback output buffer to bitstream
> Usage: "./modetest -M msm -s <connector_id>:<widthxheight>
> -a -o <filepath>
> -P <plane_id>@<crtc_id>:<widthxheight>+0+0 at RG24"
>
>This currently supports a singular writeback connector.
>
>Changes made in V2:
>- Added helper method that checks if user pipe has writeback connector
>- Added error message for dump flag if no writeback connector is found
>- Polls on the writeback fence fd until writeback is complete
>
>Changes made in V3:
>- Resolved compiler warnings
>- Defined ETIME to ETIMEDOUT in cases where ETIME is undefined
>
>Co-developed-by: Rohith Iyer <quic_rohiiyer at quicinc.com>
>Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>---
> tests/modetest/buffers.c | 19 ++++
> tests/modetest/buffers.h | 1 +
> tests/modetest/modetest.c | 183 ++++++++++++++++++++++++++++++++++----
> 3 files changed, 184 insertions(+), 19 deletions(-)
>
>diff --git a/tests/modetest/buffers.c b/tests/modetest/buffers.c
>index 8a8d9e01..279d7b28 100644
>--- a/tests/modetest/buffers.c
>+++ b/tests/modetest/buffers.c
>@@ -353,3 +353,22 @@ void bo_destroy(struct bo *bo)
>
> free(bo);
> }
>+
>+void bo_dump(struct bo *bo, const char *filename)
>+{
>+ FILE *fp;
>+
>+ if (!bo || !filename)
>+ return;
>+
>+ fp = fopen(filename, "wb");
>+ if (fp) {
>+ void *addr;
>+
>+ bo_map(bo, &addr);
>+ printf("Dumping buffer %p to file %s.\n", bo->ptr, filename);
>+ fwrite(bo->ptr, 1, bo->size, fp);
>+ bo_unmap(bo);
>+ fclose(fp);
Any chance of using libpng, libungif or at the very least implementing minimal ppm or bmp support here? Dumping to the image file would help a lot.
>+ }
>+}
>diff --git a/tests/modetest/buffers.h b/tests/modetest/buffers.h
>index 7f95396b..cbd54e9e 100644
>--- a/tests/modetest/buffers.h
>+++ b/tests/modetest/buffers.h
>@@ -36,5 +36,6 @@ struct bo *bo_create(int fd, unsigned int format,
> unsigned int handles[4], unsigned int pitches[4],
> unsigned int offsets[4], enum util_fill_pattern pattern);
> void bo_destroy(struct bo *bo);
>+void bo_dump(struct bo *bo, const char *filename);
>
> #endif
>diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
>index 2c31c4fc..8073d143 100644
>--- a/tests/modetest/modetest.c
>+++ b/tests/modetest/modetest.c
>@@ -68,8 +68,13 @@
> #include "buffers.h"
> #include "cursor.h"
>
>+#ifndef ETIME
>+#define ETIME ETIMEDOUT
>+#endif
ETIME is on its way to obsolescence. Please use ETIMEDOUT. See https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/errno.h.html
>+
> static enum util_fill_pattern primary_fill = UTIL_PATTERN_SMPTE;
> static enum util_fill_pattern secondary_fill = UTIL_PATTERN_TILES;
>+static enum util_fill_pattern plain_fill = UTIL_PATTERN_PLAIN;
>
> struct crtc {
> drmModeCrtc *crtc;
>@@ -128,6 +133,7 @@ struct device {
>
> int use_atomic;
> drmModeAtomicReq *req;
>+ int32_t writeback_fence_fd;
> };
>
> static inline int64_t U642I64(uint64_t val)
>@@ -135,6 +141,11 @@ static inline int64_t U642I64(uint64_t val)
> return (int64_t)*((int64_t *)&val);
> }
>
>+static inline uint64_t to_user_pointer(const void *ptr)
>+{
>+ return (uintptr_t)ptr;
>+}
>+
> static float mode_vrefresh(drmModeModeInfo *mode)
> {
> return mode->clock * 1000.00
>@@ -811,6 +822,10 @@ struct pipe_arg {
> struct crtc *crtc;
> unsigned int fb_id[2], current_fb_id;
> struct timeval start;
>+ unsigned int out_fb_id;
>+ struct bo *out_bo;
>+ bool custom;
>+ bool dump;
>
> int swap_count;
> };
>@@ -917,27 +932,43 @@ static struct crtc *pipe_find_crtc(struct device *dev, struct pipe_arg *pipe)
> return &dev->resources->crtcs[crtc_idx - 1];
> }
>
>+static int parse_mode_string(char *mode_string, drmModeModeInfo *user_mode)
>+{
>+ return sscanf(mode_string, "%u,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%u,%s",
>+ &user_mode->clock, &user_mode->hdisplay, &user_mode->hsync_start,
>+ &user_mode->hsync_end, &user_mode->htotal, &user_mode->hskew,
>+ &user_mode->vdisplay, &user_mode->vsync_start, &user_mode->vsync_end,
>+ &user_mode->vtotal, &user_mode->vscan, &user_mode->vrefresh,
>+ user_mode->name);
>+}
>+
> static int pipe_find_crtc_and_mode(struct device *dev, struct pipe_arg *pipe)
I'd instead rename this to pipe_find_crtc_and_builtin_mode to limit the indent level to remain sane.
Then define new function supporting builtin and custom modes.
> {
> drmModeModeInfo *mode = NULL;
> int i;
>+ static drmModeModeInfo user_mode;
Minor nit. If this a global variable, defining it so is more obvious compared to the hidden static global.
>
>- pipe->mode = NULL;
>-
>- for (i = 0; i < (int)pipe->num_cons; i++) {
>- mode = connector_find_mode(dev, pipe->con_ids[i],
>- pipe->mode_str, pipe->vrefresh);
>- if (mode == NULL) {
>- if (pipe->vrefresh)
>- fprintf(stderr,
>- "failed to find mode "
>- "\"%s-%.2fHz\" for connector %s\n",
>- pipe->mode_str, pipe->vrefresh, pipe->cons[i]);
>- else
>- fprintf(stderr,
>- "failed to find mode \"%s\" for connector %s\n",
>- pipe->mode_str, pipe->cons[i]);
>+ if (pipe->custom) {
>+ if (parse_mode_string(pipe->mode_str, &user_mode) == 13)
>+ mode = &user_mode;
>+ else
> return -EINVAL;
>+ } else {
>+ for (i = 0; i < (int)pipe->num_cons; i++) {
>+ mode = connector_find_mode(dev, pipe->con_ids[i],
>+ pipe->mode_str, pipe->vrefresh);
>+ if (mode == NULL) {
>+ if (pipe->vrefresh)
>+ fprintf(stderr,
>+ "failed to find mode "
>+ "\"%s-%.2fHz\" for connector %s\n",
>+ pipe->mode_str, pipe->vrefresh, pipe->cons[i]);
>+ else
>+ fprintf(stderr,
>+ "failed to find mode \"%s\" for connector %s\n",
>+ pipe->mode_str, pipe->cons[i]);
>+ return -EINVAL;
>+ }
> }
> }
>
>@@ -1441,6 +1472,24 @@ static int pipe_resolve_connectors(struct device *dev, struct pipe_arg *pipe)
> return 0;
> }
>
>+static bool pipe_has_writeback_connector(struct device *dev, struct pipe_arg *pipes,
>+ unsigned int count)
>+{
>+ drmModeConnector *connector;
>+ unsigned int i, j;
>+
>+ for (j = 0; j < count; j++) {
>+ struct pipe_arg *pipe = &pipes[j];
>+
>+ for (i = 0; i < pipe->num_cons; i++) {
>+ connector = get_connector_by_id(dev, pipe->con_ids[i]);
>+ if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
>+ return true;
>+ }
>+ }
>+ return false;
>+}
>+
> static int pipe_attempt_connector(struct device *dev, drmModeConnector *con,
> struct pipe_arg *pipe)
> {
>@@ -1662,6 +1711,70 @@ static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int co
> }
> }
>
>+static void writeback_config(struct device *dev, struct pipe_arg *pipes, unsigned int count)
>+{
>+ drmModeConnector *connector;
>+ unsigned int i, j;
>+
>+ for (j = 0; j < count; j++) {
>+ struct pipe_arg *pipe = &pipes[j];
>+
>+ for (i = 0; i < pipe->num_cons; i++) {
>+ connector = get_connector_by_id(dev, pipe->con_ids[i]);
>+ if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) {
>+ bo_fb_create(dev->fd, pipes[j].fourcc, pipe->mode->hdisplay,
>+ pipe->mode->vdisplay, plain_fill, &pipe->out_bo,
>+ &pipe->out_fb_id);
>+ add_property(dev, pipe->con_ids[i], "WRITEBACK_FB_ID",
>+ pipe->out_fb_id);
>+ add_property(dev, pipe->con_ids[i], "WRITEBACK_OUT_FENCE_PTR",
>+ to_user_pointer(&dev->writeback_fence_fd));
>+ }
>+ }
>+ }
>+}
>+
>+static int poll_writeback_fence(int fd, int timeout)
>+{
>+ struct pollfd fds = { fd, POLLIN };
>+ int ret;
>+
>+ do {
>+ ret = poll(&fds, 1, timeout);
>+ if (ret > 0) {
>+ if (fds.revents & (POLLERR | POLLNVAL))
>+ return -EINVAL;
>+
>+ return 0;
>+ } else if (ret == 0) {
>+ return -ETIME;
>+ } else {
>+ ret = -errno;
>+ if (ret == -EINTR || ret == -EAGAIN)
>+ continue;
>+ return ret;
>+ }
>+ } while (1);
>+
>+}
>+
>+static void dump_output_fb(struct device *dev, struct pipe_arg *pipes, char *dump_path,
>+ unsigned int count)
>+{
>+ drmModeConnector *connector;
>+ unsigned int i, j;
>+
>+ for (j = 0; j < count; j++) {
>+ struct pipe_arg *pipe = &pipes[j];
>+
>+ for (i = 0; i < pipe->num_cons; i++) {
>+ connector = get_connector_by_id(dev, pipe->con_ids[i]);
>+ if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
>+ bo_dump(pipe->out_bo, dump_path);
>+ }
>+ }
>+}
>+
> static void atomic_clear_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
> {
> unsigned int i;
>@@ -1990,7 +2103,7 @@ static void parse_fill_patterns(char *arg)
>
> static void usage(char *name)
> {
>- fprintf(stderr, "usage: %s [-acDdefMPpsCvrw]\n", name);
>+ fprintf(stderr, "usage: %s [-acDdefMPpsCvrwx]\n", name);
>
> fprintf(stderr, "\n Query options:\n\n");
> fprintf(stderr, "\t-c\tlist connectors\n");
>@@ -2000,7 +2113,12 @@ static void usage(char *name)
>
> fprintf(stderr, "\n Test options:\n\n");
> fprintf(stderr, "\t-P <plane_id>@<crtc_id>:<w>x<h>[+<x>+<y>][*<scale>][@<format>]\tset a plane\n");
>- fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]<mode>[-<vrefresh>][@<format>]\tset a mode\n");
>+ fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]");
>+ fprintf(stderr, "<mode>[-<vrefresh>][@<format>]\tset a built-in mode\n");
>+ fprintf(stderr, "\t-x <connector_id>[@<crtc_id>]:<clock,hdisplay,hsyncstart,hsyncend,");
>+ fprintf(stderr, "htotal,hskew,vdisplay,vsyncstart,vsyncend,vtotal,vscan,");
Does this work for non-WB connectors?
>+ fprintf(stderr, "vrefresh,name>\tset a custom mode\n");
>+ fprintf(stderr, "\t-o <desired file path> \t Dump writeback output buffer to file\n");
> fprintf(stderr, "\t-C\ttest hw cursor\n");
> fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
> fprintf(stderr, "\t-r\tset the preferred mode for all connectors\n");
>@@ -2017,7 +2135,7 @@ static void usage(char *name)
> exit(0);
> }
>
>-static char optstr[] = "acdD:efF:M:P:ps:Cvrw:";
>+static const char optstr[] = "acdD:efF:M:o:P:ps:Cvrw:x:";
>
> int main(int argc, char **argv)
> {
>@@ -2040,6 +2158,7 @@ int main(int argc, char **argv)
> struct property_arg *prop_args = NULL;
> unsigned int args = 0;
> int ret;
>+ char *dump_path;
>
> memset(&dev, 0, sizeof dev);
>
>@@ -2078,6 +2197,10 @@ int main(int argc, char **argv)
> /* Preserve the default behaviour of dumping all information. */
> args--;
> break;
>+ case 'o':
>+ pipe_args->dump = true;
>+ dump_path = optarg;
>+ break;
> case 'P':
> plane_args = realloc(plane_args,
> (plane_count + 1) * sizeof *plane_args);
>@@ -2096,6 +2219,7 @@ int main(int argc, char **argv)
> crtcs = 1;
> planes = 1;
> break;
>+ case 'x':
> case 's':
> pipe_args = realloc(pipe_args,
> (count + 1) * sizeof *pipe_args);
>@@ -2107,7 +2231,7 @@ int main(int argc, char **argv)
>
> if (parse_connector(&pipe_args[count], optarg) < 0)
> usage(argv[0]);
>-
>+ pipe_args->custom = (c == 'x');
> count++;
> break;
> case 'C':
>@@ -2163,6 +2287,7 @@ int main(int argc, char **argv)
>
> if (use_atomic) {
> ret = drmSetClientCap(dev.fd, DRM_CLIENT_CAP_ATOMIC, 1);
>+ drmSetClientCap(dev.fd, DRM_CLIENT_CAP_WRITEBACK_CONNECTORS, 1);
Only if dump was requested?
> if (ret) {
> fprintf(stderr, "no atomic modesetting support: %s\n", strerror(errno));
> drmClose(dev.fd);
>@@ -2206,6 +2331,12 @@ int main(int argc, char **argv)
> if (set_preferred || count)
> set_mode(&dev, pipe_args, count);
>
>+ if (pipe_has_writeback_connector(&dev, pipe_args, count))
>+ writeback_config(&dev, pipe_args, count);
>+ else if (pipe_args->dump)
>+ fprintf(stderr,
>+ "No writeback connector found - dump will be skipped.\n");
>+
> if (plane_count)
> atomic_set_planes(&dev, plane_args, plane_count, false);
>
>@@ -2215,6 +2346,20 @@ int main(int argc, char **argv)
> return 1;
> }
>
>+ /*
>+ * Since only writeback connectors have an output fb, this should only be
>+ * called for writeback.
>+ */
>+ if (pipe_has_writeback_connector(&dev, pipe_args, count)) {
>+ ret = poll_writeback_fence(dev.writeback_fence_fd, 1000);
>+ if (ret)
>+ fprintf(stderr,
>+ "Poll for writeback error: %d. Skipping Dump.\n",
>+ ret);
>+ else if (pipe_args->dump)
>+ dump_output_fb(&dev, pipe_args, dump_path, count);
>+ }
>+
> if (test_vsync)
> atomic_test_page_flip(&dev, pipe_args, plane_args, plane_count);
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list