[PATCH V2 0/3] drm/panel: Add NewVision NV3051D Panels

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Add the NewVision NV3051D panel as found on the Anbernic RG353P and
RG353V. The underlying LCD panel itself is unknown (the NV3051D is
the controller), so the device name is used for the panel with a
fallback to the driver IC.

Changes from V1:
 - Changed compatible string to the driver IC.
 - Updated documentation to use new compatible string with board
   name.
 - Refactored somewhat to make it easier to support other LCD panels
   with this kernel module.
 - Added support for 60hz mode. Adjusted pixel clock to ensure proper
   60hz and 120hz (previously was running at 124hz).
 - Added vendor prefix for NewVision. Anbernic vendor prefix added in
   https://lore.kernel.org/linux-devicetree/20220906210324.28986-2-macroalpha82@gmail.com

Chris Morgan (3):
  dt-bindings: vendor-prefixes: add NewVision vendor prefix
  dt-bindings: display: panel: Add NewVision NV3051D bindings
  drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel

 .../display/panel/newvision,nv3051d.yaml      |  55 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-newvision-nv3051d.c   | 513 ++++++++++++++++++
 5 files changed, 580 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3051d.c

-- 
2.25.1