[PATCH V2 2/3] dt-bindings: display: panel: Add NewVision NV3051D bindings

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Wed Sep 21 06:51:34 UTC 2022


On 20/09/2022 16:59, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
> 
> Add documentation for the NewVision NV3051D panel bindings.
> Note that for the two expected consumers of this panel binding
> the underlying LCD model is unknown. Name "anbernic,rg353p-panel"
> is used because the hardware itself is known as "anbernic,rg353p".
> 
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>  .../display/panel/newvision,nv3051d.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
> new file mode 100644
> index 000000000000..d90bca4171c2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NewVision NV3051D based LCD panel
> +
> +description: |
> +  The NewVision NV3051D is a driver chip used to drive DSI panels. For now,
> +  this driver only supports the 640x480 panels found in the Anbernic RG353
> +  based devices.
> +
> +maintainers:
> +  - Chris Morgan <macromorgan at hotmail.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - anbernic,rg353p-panel

Are these vendor prefixs documented?

> +          - anbernic,rg353v-panel
> +      - const: newvision,nv3051d

Blank line.

> +  reg: true
> +  backlight: true
> +  port: true
> +  reset-gpios: true
> +  vdd-supply:
> +    description: regulator that supplies the vdd voltage

Skip description and make it just "true". It's kind of obvious.

> +
> +required:
> +  - compatible
> +  - reg
> +  - backlight
> +  - vdd-supply

Best regards,
Krzysztof


More information about the dri-devel mailing list