[PATCH v2 00/33] drm: Analog TV Improvements

Maxime Ripard maxime at cerno.tech
Thu Sep 22 14:31:12 UTC 2022


Hi,

On Thu, Sep 22, 2022 at 04:25:17PM +0200, Maxime Ripard wrote:
> Here's a series aiming at improving the command line named modes support,
> and more importantly how we deal with all the analog TV variants.
> 
> The named modes support were initially introduced to allow to specify the
> analog TV mode to be used.
> 
> However, this was causing multiple issues:
> 
>   * The mode name parsed on the command line was passed directly to the
>     driver, which had to figure out which mode it was suppose to match;
> 
>   * Figuring that out wasn't really easy, since the video= argument or what
>     the userspace might not even have a name in the first place, but
>     instead could have passed a mode with the same timings;
> 
>   * The fallback to matching on the timings was mostly working as long as
>     we were supporting one 525 lines (most likely NSTC) and one 625 lines
>     (PAL), but couldn't differentiate between two modes with the same
>     timings (NTSC vs PAL-M vs NSTC-J for example);
> 
>   * There was also some overlap with the tv mode property registered by
>     drm_mode_create_tv_properties(), but named modes weren't interacting
>     with that property at all.
> 
>   * Even though that property was generic, its possible values were
>     specific to each drivers, which made some generic support difficult.
> 
> Thus, I chose to tackle in multiple steps:
> 
>   * A new TV mode property was introduced, with generic values, each driver
>     reporting through a bitmask what standard it supports to the userspace;
> 
>   * This option was added to the command line parsing code to be able to
>     specify it on the kernel command line, and new atomic_check and reset
>     helpers were created to integrate properly into atomic KMS;
> 
>   * The named mode parsing code is now creating a proper display mode for
>     the given named mode, and the TV standard will thus be part of the
>     connector state;
> 
>   * Two drivers were converted and tested for now (vc4 and sun4i), with
>     some backward compatibility code to translate the old TV mode to the
>     new TV mode;
> 
> Unit tests were created along the way.
> 
> One can switch from NTSC to PAL now using (on vc4)
> 
> modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
> modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL
> 
> Let me know what you think,
> Maxime
> 
> To: David Airlie <airlied at linux.ie>
> To: Daniel Vetter <daniel at ffwll.ch>
> To: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> To: Maxime Ripard <mripard at kernel.org>
> To: Thomas Zimmermann <tzimmermann at suse.de>
> To: Emma Anholt <emma at anholt.net>
> To: Jani Nikula <jani.nikula at linux.intel.com>
> To: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
> To: Rodrigo Vivi <rodrigo.vivi at intel.com>
> To: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
> To: Ben Skeggs <bskeggs at redhat.com>
> To: Karol Herbst <kherbst at redhat.com>
> To: Lyude Paul <lyude at redhat.com>
> To: Chen-Yu Tsai <wens at csie.org>
> To: Jernej Skrabec <jernej.skrabec at gmail.com>
> To: Samuel Holland <samuel at sholland.org>
> Cc: Geert Uytterhoeven <geert at linux-m68k.org>
> Cc: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
> Cc: "Noralf Trønnes" <noralf at tronnes.org>
> Cc: Dave Stevenson <dave.stevenson at raspberrypi.com>
> Cc: Dom Cobley <dom at raspberrypi.com>
> Cc: Phil Elwell <phil at raspberrypi.com>
> Cc: <dri-devel at lists.freedesktop.org>
> Cc: linux-kernel at vger.kernel.org
> Cc: intel-gfx at lists.freedesktop.org
> Cc: nouveau at lists.freedesktop.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-sunxi at lists.linux.dev
> Cc: Hans de Goede <hdegoede at redhat.com>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> 
> ---
> Changes in v3:
> - Applied some of the fixes to vc4 and sun4i
> - Renamed the old TV mode property to legacy_mode
> - Fixed a bunch of bisection errors
> - Removed most of the redundant TV modes
> - Added a new None TV mode to not fall back on NTSC by mistake
> - Fixed the mode generation function to match better what is expected
> - Added some logging to the mode generation function
> - Split the improvements to the named mode parsing logic into separate patches
> - Added more checks to the TV atomic_check helper
> - Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Sorry, this is obviously the v3...

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20220922/4b3c42ab/attachment.sig>


More information about the dri-devel mailing list