[RFC PATCH v5 2/6] dt-bindings: display: ti: am65x-dss: Add new port for am625-dss

[Krzysztof Kozlowski]

On 28/09/2022 19:52, Aradhya Bhatia wrote:
> Add 3rd "port" property for am625-dss.
> This port represents the output from the 2nd OLDI TX (OLDI TX 1) latched
> onto the first video port (VP0) from the DSS controller on AM625 SOC.
> 
> Signed-off-by: Aradhya Bhatia <a-bhatia1 at ti.com>
> ---
>  .../bindings/display/ti/ti,am65x-dss.yaml      | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 6bbce921479d..99576c6ec108 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -82,13 +82,18 @@ properties:
>        port at 0:
>          $ref: /schemas/graph.yaml#/properties/port
>          description:
> -          The DSS OLDI output port node form video port 1
> +          The DSS OLDI output port node form video port 1 (OLDI TX 0).
>  
>        port at 1:
>          $ref: /schemas/graph.yaml#/properties/port
>          description:
>            The DSS DPI output port node from video port 2
>  
> +      port at 2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          The DSS OLDI output port node form video port 1 (OLDI TX 1).
> +
>    ti,am65x-oldi-io-ctrl:
>      $ref: "/schemas/types.yaml#/definitions/phandle"
>      description:
> @@ -104,6 +109,17 @@ properties:
>        Input memory (from main memory to dispc) bandwidth limit in
>        bytes per second
>  
> +if:

Entire if: block is usually put under allOf:, so when the list of
conditions grow, you do not need to change indentation.

With the change:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Best regards,
Krzysztof