[PATCH v2 23/37] drm: xlnx: zynqmp_dpsub: Move DRM/KMS initialization to separate file

[Laurent Pinchart]

Start preparation for using the DPSUB as a standalone DisplayPort
encoder without a display controller by moving the DRM/KMS
initialization to a new zynqmp_kms.c file. No functional change
intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 drivers/gpu/drm/xlnx/Makefile       |  2 +-
 drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 43 ++----------------
 drivers/gpu/drm/xlnx/zynqmp_kms.c   | 70 +++++++++++++++++++++++++++++
 drivers/gpu/drm/xlnx/zynqmp_kms.h   | 19 ++++++++
 4 files changed, 93 insertions(+), 41 deletions(-)
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_kms.c
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_kms.h

diff --git a/drivers/gpu/drm/xlnx/Makefile b/drivers/gpu/drm/xlnx/Makefile
index 51c24b72217b..ea1422a39502 100644
--- a/drivers/gpu/drm/xlnx/Makefile
+++ b/drivers/gpu/drm/xlnx/Makefile
@@ -1,2 +1,2 @@
-zynqmp-dpsub-y := zynqmp_disp.o zynqmp_dpsub.o zynqmp_dp.o
+zynqmp-dpsub-y := zynqmp_disp.o zynqmp_dpsub.o zynqmp_dp.o zynqmp_kms.o
 obj-$(CONFIG_DRM_ZYNQMP_DPSUB) += zynqmp-dpsub.o
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
index cb01548f2b8c..e4cb7b82556b 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
@@ -17,9 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <drm/drm_atomic_helper.h>
-#include <drm/drm_bridge.h>
 #include <drm/drm_bridge_connector.h>
-#include <drm/drm_connector.h>
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_helper.h>
@@ -30,12 +28,12 @@
 #include <drm/drm_mode_config.h>
 #include <drm/drm_module.h>
 #include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
 
 #include "zynqmp_disp.h"
 #include "zynqmp_dp.h"
 #include "zynqmp_dpsub.h"
+#include "zynqmp_kms.h"
 
 /* -----------------------------------------------------------------------------
  * Dumb Buffer & Framebuffer Allocation
@@ -98,8 +96,6 @@ static const struct drm_driver zynqmp_dpsub_drm_driver = {
 
 static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 {
-	struct drm_encoder *encoder = &dpsub->encoder;
-	struct drm_connector *connector;
 	struct drm_device *drm = &dpsub->drm;
 	int ret;
 
@@ -120,43 +116,10 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
 
 	drm_kms_helper_poll_init(drm);
 
-	/*
-	 * Initialize the DISP and DP components. This will creates planes,
-	 * CRTC, and a bridge for the DP encoder.
-	 */
-	ret = zynqmp_disp_drm_init(dpsub);
-	if (ret)
+	ret = zynqmp_dpsub_kms_init(dpsub);
+	if (ret < 0)
 		goto err_poll_fini;
 
-	ret = zynqmp_dp_drm_init(dpsub);
-	if (ret)
-		goto err_poll_fini;
-
-	/* Create the encoder and attach the bridge. */
-	encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp);
-	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_NONE);
-
-	ret = drm_bridge_attach(encoder, dpsub->bridge, NULL,
-				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-	if (ret) {
-		dev_err(dpsub->dev, "failed to attach bridge to encoder\n");
-		goto err_poll_fini;
-	}
-
-	/* Create the connector for the chain of bridges. */
-	connector = drm_bridge_connector_init(drm, encoder);
-	if (IS_ERR(connector)) {
-		dev_err(dpsub->dev, "failed to created connector\n");
-		ret = PTR_ERR(connector);
-		goto err_poll_fini;
-	}
-
-	ret = drm_connector_attach_encoder(connector, encoder);
-	if (ret < 0) {
-		dev_err(dpsub->dev, "failed to attach connector to encoder\n");
-		goto err_poll_fini;
-	}
-
 	/* Reset all components and register the DRM device. */
 	drm_mode_config_reset(drm);
 
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
new file mode 100644
index 000000000000..e4e7f8fd96d2
--- /dev/null
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ZynqMP DisplayPort Subsystem - KMS API
+ *
+ * Copyright (C) 2017 - 2021 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon at xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ */
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "zynqmp_disp.h"
+#include "zynqmp_dp.h"
+#include "zynqmp_dpsub.h"
+#include "zynqmp_kms.h"
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int zynqmp_dpsub_kms_init(struct zynqmp_dpsub *dpsub)
+{
+	struct drm_encoder *encoder = &dpsub->encoder;
+	struct drm_connector *connector;
+	int ret;
+
+	/*
+	 * Initialize the DISP and DP components. This will creates planes,
+	 * CRTC, and a bridge for the DP encoder.
+	 */
+	ret = zynqmp_disp_drm_init(dpsub);
+	if (ret)
+		return ret;
+
+	ret = zynqmp_dp_drm_init(dpsub);
+	if (ret)
+		return ret;
+
+	/* Create the encoder and attach the bridge. */
+	encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp);
+	drm_simple_encoder_init(&dpsub->drm, encoder, DRM_MODE_ENCODER_NONE);
+
+	ret = drm_bridge_attach(encoder, dpsub->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(dpsub->dev, "failed to attach bridge to encoder\n");
+		return ret;
+	}
+
+	/* Create the connector for the chain of bridges. */
+	connector = drm_bridge_connector_init(&dpsub->drm, encoder);
+	if (IS_ERR(connector)) {
+		dev_err(dpsub->dev, "failed to created connector\n");
+		return PTR_ERR(connector);
+	}
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret < 0) {
+		dev_err(dpsub->dev, "failed to attach connector to encoder\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.h b/drivers/gpu/drm/xlnx/zynqmp_kms.h
new file mode 100644
index 000000000000..a6729d9d82cc
--- /dev/null
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ZynqMP DisplayPort Subsystem - KMS API
+ *
+ * Copyright (C) 2017 - 2021 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon at xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ */
+
+#ifndef _ZYNQMP_KMS_H_
+#define _ZYNQMP_KMS_H_
+
+struct zynqmp_dpsub;
+
+int zynqmp_dpsub_kms_init(struct zynqmp_dpsub *dpsub);
+
+#endif /* _ZYNQMP_KMS_H_ */
-- 
Regards,

Laurent Pinchart